Superplastic Forming and Foaming of Cellular Aluminum Components
نویسندگان
چکیده
منابع مشابه
Cavitation During Superplastic Forming
Cavitation is the opening of pores during superplastic forming, typically at grain boundary triple points or on second phase grain boundary particles during slip of grain boundaries. Theories for the initiation of cavitation are reviewed. It seems that cavitation is unlikely to occur by processes intrinsic to metals such as dislocation mechanisms or point defect condensation. It is proposed tha...
متن کاملOptimization of Superplastic Forming Technology
The objective of this paper is a superplastic forming (SPF) technologies design and optimization. The conditions of superplasticity are very sensitive to strain rates and temperature characteristic of deformation process. The presented work gives an approach to design the SPF technologies that satisfies such conditions.A possibility to decrease the temperature of the industrial forming of the T...
متن کاملSimulation of Foaming and Deformation for Composite Aluminum Foams
In this study, at the first stage, the rupture criterion of bubbles wall in Aluminum metal foam liquid was investigated by using Lattice Boltzmann. The two phases modeling were accomplished by using a modified Shan-Chen model. This model was run for several bubbles in A356+3wt.%SiC melt system. Then, bubbles morphologies (virtual metallographic) for A356+3wt.%SiC foams were simulated. Results s...
متن کاملThe Superplastic Forming of Bulk Metallic Glasses
Superplastic forming (SPF) is introduced in this article as a net-shape processing method for bulk metallic glasses (BMGs), commercially known as Liquidmetal® alloys. This method decouples fast cooling and forming of the BMG. Forming takes place in the supercooled liquid region, where the BMG exists as a highly viscous liquid and increases its fl uidity with increasing temperature. The SPF meth...
متن کاملSuperplastic Forming of Inconel Alloy 718spf
Superplasticforming (SPF) has become an important manufacturing method for aerospace and fuselage components. The basic reasons for the popularity of this process are reviewed and the compatibilityoffine-grained INCONELB alloy71 8SPF@ to superplasticforming are presented in this paper. The temperature limitations of current aluminum and titanium alloys employed in SPF parts for gas turbine comp...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2006
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.47.2223