Surface Area Evaluation of Electrically Conductive Polymer-Based Textiles
نویسندگان
چکیده
منابع مشابه
Electrically Conductive Latex-Based Composites
Electrically conductive polymer composites filled with carbon black can exhibit the mechanical behavior of a polymer and metallic electrical conductivity. Unfortunately, excessive amounts of carbon black can produce brittle films and too little carbon black can result in low conductivity. Composite conductivity can be dramatically improved by using latex as the matrix starting material. Latex p...
متن کاملFabrication of electrically conductive metal patterns at the surface of polymer films by microplasma-based direct writing.
We describe a direct-write process for producing electrically conductive metal patterns at the surface of polymers. Thin films of poly(acrylic acid) (PAA) loaded with Ag ions are reduced by a scanning, atmospheric-pressure microplasma to form crystalline Ag features with a line width of 300 μm. Materials analysis reveals that the metallization occurs in a thin layer of ∼5 μm near the film surfa...
متن کاملElectrically Conductive Adhesives
Electrically conductive adhesives are being used in electronic packaging for several decades. A brief review of the dynamic development of conductive adhesives under the influence of the miniaturization, the adaptation of environmental friendly manufacturing processes is presented. With respect to the importance of isotropically conductive adhesives (ICA), a new contact model to analyze the pri...
متن کاملStretchable, porous, and conductive energy textiles.
Recently there is strong interest in lightweight, flexible, and wearable electronics to meet the technological demands of modern society. Integrated energy storage devices of this type are a key area that is still significantly underdeveloped. Here, we describe wearable power devices using everyday textiles as the platform. With an extremely simple "dipping and drying" process using single-wall...
متن کاملElectrically conductive fabric based stretchable triboelectric energy harvester
Stretchable conductive fabric-based triboelectric generator (TENG), to develop breathing/chest band for harvesting energy at low frequency has been developed. Stretchable conductive nylon-fabric and carbon-based elastomer composites were used as electrodes. During this work, film casting technique was implemented and combination of different materials, such as, polydimethylsiloxane (PDMS) and p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2018
ISSN: 1996-1944
DOI: 10.3390/ma11101931