Surface chemistry of Ti6Al4V components fabricated using selective laser melting for biomedical applications
نویسندگان
چکیده
منابع مشابه
In-Built Customised Mechanical Failure of 316L Components Fabricated Using Selective Laser Melting
The layer-by-layer building methodology used within the powder bed process of Selective Laser Melting facilitates control over the degree of melting achieved at every layer. This control can be used to manipulate levels of porosity within each layer, effecting resultant mechanical properties. If specifically controlled, it has the potential to enable customisation of mechanical properties or de...
متن کاملManufacturing and Characterization of Ti6Al4V Lattice Components Manufactured by Selective Laser Melting
The paper investigates the fabrication of Selective Laser Melting (SLM) titanium alloy Ti6Al4V micro-lattice structures for the production of lightweight components. Specifically, the pillar textile unit cell is used as base lattice structure and alternative lattice topologies including reinforcing vertical bars are also considered. Detailed characterizations of dimensional accuracy, surface ro...
متن کاملTi-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting.
Triply periodic minimal surface (TPMS) structures have already been shown to be a versatile source of biomorphic scaffold designs. Therefore, in this work, Ti-6Al-4V Gyroid and Diamond TPMS lattices having an interconnected high porosity of 80-95% and pore sizes in the range of 560-1600 μm and 480-1450 μm respectively were manufactured by selective laser melting (SLM) for bone implants. The man...
متن کاملLaser-fabricated dielectric optical components for surface plasmon polaritons.
Fabrication of dielectric optical components for surface plasmon polaritons (SPPs) by two-photon polymerization (2PP) is studied. This direct-write femtosecond laser technology provides a low-cost and flexible method for the fabrication and investigation of plasmonic structures and optical components. Using the 2PP technique, we fabricated narrow dielectric ridges with dimensions as small as 15...
متن کاملCustomized a Ti6Al4V Bone Plate for Complex Pelvic Fracture by Selective Laser Melting
In pelvic fracture operations, bone plate shaping is challenging and the operation time is long. To address this issue, a customized bone plate was designed and produced using selective laser melting (SLM) technology. The key steps of this study included designing the customized bone plate, metal 3D printing, vacuum heat treatment, surface post-processing, operation rehearsal, and clinical appl...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: C
سال: 2016
ISSN: 0928-4931
DOI: 10.1016/j.msec.2016.05.054