Surface Damage of Ultra-Fine Grain Copper in High-Cycle Fatigue Regime

Propagation Lifetime from the Surface and Internal Defects in the Ultra High Cycle Fatigue Regime

Ultra High Cycle fatigue leads to a failure initiated in the bulk material of a material. Some results on the nodular cast iron are presented: initiation occurs from the defects, located at the surface or in the bulk. It has been shown that environment plays a major role that could explain the difference between fatigue lives, for the surface and internal initiation. The influence of the defect...

Evaluation of continuum damage at different temperatures for aluminum-silicon alloy of engine piston within low-cycle fatigue regime

In this article, the isothermal low-cycle fatigue continuum damage in the engine piston aluminum alloy has been evaluated at different temperatures. For this objective, experimental data of low-cycle fatigue tests on standard specimens were used at 280, 350 and 425°C. Based on the continuum damage mechanics method, the fatigue damage was calculated during cyclic loading. Obtained results, inclu...

Thermodynamics and kinetics of grain boundaries in ultra fine grained copper produced by severe plastic deformation

1 List of symbols and abbreviations 3 Chapter 1: INTRODUCTION 6 Chapter 2: LITERATURE SURVEY 8 2.1: The essence of ultra fine grained materials 8 2.2: Severe plastic deformation: a method for producing UFG microstructure 11 2.3: Physical properties of materials derived from GB character 15 2.4: Non-equilibrium GBs: theoretical aspects 16 2.4.1: Conventional models for GB structure 16 2.4.2: Mod...

Ultra-Low Cycle Fatigue Fracture Life of a Type of Buckling Restrained Brace

Buckling restrained braced frames (BRBFs) for seismic load resistance have been widely used in recent years. One of the key requirements for a buckling restrained brace is to sustain large plastic deformations under severe ground motions. The core of a buckling restrained brace is prone to fatigue fracture under cyclic loading. The earthquake induced fracture type of the core plate in a bucklin...

Analysis of Ultra Low Cycle Fatigue Problems with the Barcelona Plastic Damage Model