Surface modification of Ti‐6Al‐4V powder during recycling in EBM process
نویسندگان
چکیده
منابع مشابه
Laser Surface Modification of Ti6Al4V Implants
To improve the biocompatibility of implants, surface medication is a common practice. Depending on the surface medication process, the physical and/or chemical properties of the surface are altered, keeping the bulk properties same. The flexibility and wide application potential of laser as a surface modification tool gives it certain advantages over the traditional physical and chemical proces...
متن کاملFunctionalization of Biomedical Ti6Al4V via In Situ Alloying by Cu during Laser Powder Bed Fusion Manufacturing
The modern medical industry successfully utilizes Laser Powder Bed Fusion (LPBF) to manufacture complex custom implants. Ti6Al4V is one of the most commonly used biocompatible alloys. In surgery practice, infection at the bone-implant interface is one of the key reasons for implant failure. Therefore, advanced implants with biocompatibility and antibacterial properties are required. Modificatio...
متن کاملExperimental Study on the Surface Modification by Electrical Discharge Process
The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on the metal surfaces. This study aims to improve of pure aluminum surface properties through Electrical Discharge process with Monel 400 electrode. ...
متن کاملRecycling process of spent bleaching clay: Optimization by response surface methodology
Oil refining is an inevitable step in production of edible and industrial oil. Bleaching is the most important process among the refining processes. Bleaching adsorption is the most common method and clay is the most widely used adsorbent in this method. Disposal of bleaching clay, as a waste from re-refining plants, makes many environmental problems and economic losses. In the current study, t...
متن کاملCharacterization of loose powder sintered porous titanium and Ti6Al4V alloy
Porous titanium and Ti6Al4V alloy, biomedical candidate materials for use in orthopedic and dental implants, were manufactured by sintering the powders at various temperatures in loose condition. The characteristics of the corresponding powders and utilized sintering temperatures limited the final porosities in the range 30-37.5 vol. %. Similar to wrought alloys, compression stress-strain curve...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Surface and Interface Analysis
سال: 2020
ISSN: 0142-2421,1096-9918
DOI: 10.1002/sia.6847