Surface Modification Techniques for Endothelial Cell Seeding in PDMS Microfluidic Devices
نویسندگان
چکیده
منابع مشابه
Modification of the glass surface property in PDMS-glass hybrid microfluidic devices.
This paper presents a simple method to change the hydrophilic nature of the glass surface in a poly(dimethylsiloxane) (PDMS)-glass hybrid microfluidic device to hydrophobic by an extra-heating step during the fabrication process. Glass substrates bonded to a native or oxygen plasma-treated PDMS chip having microchambers (12.5 mm diameter, 110 µm height) were heated at 200°C for 3 h, and then t...
متن کاملFunctionalized glass coating for PDMS microfluidic devices
Microfluidic devices can perform multiple laboratory functions on a single, compact, and fully integrated chip. However, fabrication of microfluidic devices is difficult, and current methods, such as glass-etching or soft-lithography in PDMS, are either expensive or yield devices with poor chemical robustness. We introduce a simple method that combines the simple fabrication of PDMS with superi...
متن کاملPdms Microfluidic Devices with Ptfe Passivated Channels
PDMS microfluidic devices whose whole inner surfaces are covered with PTFE (polytetrafluoroethylene) are described. The major problems of PDMS fluidic devices in practical use, are surface degradation with organic solvents and unexpected absorption of chemical materials. In order to overcome these problems, spin/dip-coated perfluoro amorphous polymer is used to form the passivation PTFE layer o...
متن کاملAdhesive-based bonding technique for PDMS microfluidic devices.
We present a simple and inexpensive technique for bonding PDMS microfluidic devices. The technique uses only adhesive tape and an oven; plasma bonders and cleanroom facilities are not required. It also produces channels that are immediately hydrophobic, allowing formation of aqueous-in-oil emulsions.
متن کاملSurface molecular property modifications for poly(dimethylsiloxane) (PDMS) based microfluidic devices
Fast advancements of microfabrication processes in past two decades have reached to a fairly matured stage that we can manufacture a wide range of microfluidic devices. At present, the main challenge is the control of nanoscale properties on the surface of lab-on-a-chip to satisfy the need for biomedical applications. For example, poly(dimethylsiloxane) (PDMS) is a commonly used material for mi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biosensors
سال: 2020
ISSN: 2079-6374
DOI: 10.3390/bios10110182