Surface modification techniques for zirconia-based bioceramics: A review
نویسندگان
چکیده
منابع مشابه
Zirconia Bioceramics as All-ceramics Crowns Material: a Review
Zirconia (ZrO 2 ), known as a kind of bioceramics widely applied in prosthodontics, is considered as a promising alternative to conventional bioceramics owing to its desirable mechanical strength, toughness, wear resistance, corrosion resistance, biocompatibility etc. However, the development of zirconia is hindered due to its instability in long-term clinical observations such as the cracking ...
متن کاملA Review of Endodontic Bioceramics
Background and Aim: The use of ceramics has a long history. A new category of these materials was used in medicine in 1960 introduced as bioceramics. Biocompatibility, osteoinductivity and sealing ability are among the most favorable characteristics of endodontic bioceramics. Introduction of mineral trioxide aggregate (MTA) revolutionized endodontics and this new era is progressively growing. ...
متن کاملInfluence of surface modification techniques on shear bond strength between different zirconia cores and veneering ceramics
PURPOSE Veneering porcelain might be delaminated from underlying zirconia-based ceramics. The aim of this study was the evaluation of the effect of different surface treatments and type of zirconia (white or colored) on shear bond strength (SBS) of zirconia core and its veneering porcelain. MATERIALS AND METHODS Eighty zirconia disks (40 white and 40 colored; 10 mm in diameter and 4 mm thick)...
متن کاملBioceramics in endodontics – a review
Bioceramics are materials which include Alumina, Zirconia, Bioactive glass, Glass ceramics, Hydroxyapatite, resorbable Calcium phosphates, among others. They have been used in dentistry for filling up bony defects, root repair materials, apical fill materials, perforation sealing, as endodontic sealers and as aids in regeneration. They have certain advantages like biocompatibility, non toxicity...
متن کاملOxide surface modification: synthesis and characterization of zirconia-coated alumina.
Four aluminas were used as supports for impregnation with a zirconium oxide with the aim to achieve a coating, without phase separation, between support and modifier. The supports were impregnated with different concentrations of zirconium aqueous resin, obtained through the polymeric precursor method. After impregnation the samples were calcined and then characterized by XRD, which led to iden...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Pharmacy And Bioallied Sciences
سال: 2019
ISSN: 0975-7406
DOI: 10.4103/jpbs.jpbs_45_19