Surface Modification Technology (Thermal Spraying, Cold Spray, Aerosol Deposition and Cladding by Welding)
نویسندگان
چکیده
منابع مشابه
Bio-ceramic Composite Coatings by Cold Spray Technology
Bioceramics such as hydroxyapatite (HAP) have been conventionally deposited by plasma spray technique. However, due to the inherent high temperature in the plasma, deleterious effects such as evaporation, phase alteration, residual stress, debonding, and gas release etc., commonly occur in these coatings. This paper presents a novel approach to deposit bioceramic coatings at temperatures well b...
متن کاملGRANULAR YBaCuO FILMS PREPARED BY METALORGANIC CHEMICAL AEROSOL DEPOSITION TECHNOLOGY
Fine-grain thin superconducting films can be prepared by metalorganic Chemical Aerosol Deposition Technology (CADT). In this paper, we present the preparation and properties of YBa2Cu307_ x films on the different substrates, Si and SrTiO 3 (100). It is shown that the zero-resistance temperature (Tc,0) of the films on SrTiO 3 substrates is about 90 K, and the critical current density (Jc) at 77 ...
متن کاملLuminescent Thin Films by the Chemical Aerosol Deposition Technology (cadt)
Zinc sulphide thin films have been deposited with CADT using zinc chloride and zinc acetylacetonate as Zn compounds and thiourea and 1,1,3,3-tetramethylthiourea as S compounds soluted in methanol, ethanol, isopropanol and cellosolve. After optimalization of the deposition process homogeneous layers with a c-axis oriented hexagonal columnar structure with a high density (up to 96%) were obtained...
متن کاملceramic surface modification of textiles by atomic layer deposition
24 Nanoscale ceramic surface modification of textiles by atomic layer deposition R ecent opportunities to merge traditional inorganic materials processing with organic fibrous textiles are creating new possibilities in electrical, optical and mechanical applications for textiles. Textiles are made of low-cost natural or synthetic fibers and have unique flexibility, strength and durability with ...
متن کاملModification of Silica surface by Titanium sol synthesis and characterization
Hydrophobic silica titanium nanoparticles (STNPs) were successfully synthesized by the sol-gel process using liquid modification. Fourier transform infrared (FTIR) and X-ray fluorescence (XRF) studies were demonstrated the attachment of titanium on the silica surface. Titanium content enhanced the agglomeration of particles as shown in topography results. The N2 adsorption-desorption followed T...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2009
ISSN: 0021-4787,1883-7204
DOI: 10.2207/jjws.78.441