Surface modified CFx cathode material for ultrafast discharge and high energy density
نویسندگان
چکیده
منابع مشابه
Activated carbons derived from coconut shells as high energy density cathode material for Li-ion capacitors
In this manuscript, a dramatic increase in the energy density of ~ 69 Wh kg⁻¹ and an extraordinary cycleability ~ 2000 cycles of the Li-ion hybrid electrochemical capacitors (Li-HEC) is achieved by employing tailored activated carbon (AC) of ~ 60% mesoporosity derived from coconut shells (CS). The AC is obtained by both physical and chemical hydrothermal carbonization activation process, and co...
متن کاملAg4V2O6F2 (SVOF): a high silver density phase and potential new cathode material for implantable cardioverter defibrillators.
The electrochemical reactivity of the cathode material Ag 4V 2O 6F 2 (SVOF) versus lithium, with a particular emphasis on the lithium insertion mechanism, was studied by means of the complementary techniques in situ X-ray diffraction, electron paramagnetic resonance, and high-resolution transmisssion electron microscopy. This study confirms the initial reports of a high capacity for SVOF of 148...
متن کاملEstimating motor unit discharge patterns from high-density surface electromyogram.
OBJECTIVE We systematically tested the capability of the Convolution Kernel Compensation (CKC) method to identify motor unit (MU) discharge patterns from the simulated and experimental surface electromyogram (sEMG) during low-force contractions. METHODS sEMG was detected with a grid of 13 x 5 electrodes. In simulated signals with 20 dB signal-to-noise ratio, 11+/-3 out of 63 concurrently acti...
متن کاملExploring Oxygen Activity in the High Energy P2-Type Na0.78Ni0.23Mn0.69O2 Cathode Material for Na-Ion Batteries.
Large-scale electric energy storage is fundamental to the use of renewable energy. Recently, research and development efforts on room-temperature sodium-ion batteries (NIBs) have been revitalized, as NIBs are considered promising, low-cost alternatives to the current Li-ion battery technology for large-scale applications. Herein, we introduce a novel layered oxide cathode material, Na0.78Ni0.23...
متن کاملA high performance lithium-ion battery using LiNa0.02K0.01FePO4/C as cathode material and anatase TiO2 nanotube arrays as anode material
In this paper we report on a lithium ion battery (LIB) based on improved olivine lithium iron phosphate/carbon (LiFePO4/C) as cathode material and LiNa0.02K0.01FePO4/C synthesized by sol-gel method and TiO2 nanotube arrays (TNAs) with an anatase phasesynthesized through anodization of Ti foil as an anode electrode. Crystallographic structure and surface morphology of the cathode and anode mate...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: J. Mater. Chem. A
سال: 2014
ISSN: 2050-7488,2050-7496
DOI: 10.1039/c4ta05492j