Surface Modified Silicon Nitride Powder with Highly Dispersed Sintering Aid via Aqueous Processing.
نویسندگان
چکیده
منابع مشابه
Low Temperature Sintering Additives for Silicon Nitride
This work deals with sintering additives for the low temperature pressureless sintering of Si3N4, via a transient liquid technique. Much attention has been given to the development of a sintering process using low-cost Si3N4 powder (Silzot HQ, Germany) as the starting material and employing sintering additives which are also both economically attractive and enable sintering at low temperatures....
متن کاملHighly selective olefin epoxidation with aqueous H2O2 over surface-modified TaSBA15 prepared via the TMP method.
Trialkylsiloxy-modified Ta(v) centers on mesoporous silica exhibit excellent selectivity for epoxide formation (>98% after 2 h) in the oxidation of cyclohexene using aqueous H2O2 as the oxidant; the modified catalysts exhibit an increased lifetime, retaining high selectivity after 6 h of reaction (>95% epoxide).
متن کاملPhoto-processing of silicon nitride
Silicon nitride films were synthesized using the new process of photo-chemical vapour deposition (photo-CVD). Films of different compositions were prepared by mercury-sensitized photo-CVD using 2% silane and ammonia as reactant gases. Material properties of interest to device technology have been evaluated. Dependence of the properties of the films on the Si/N ratio and the amount of hydrogen p...
متن کاملTextured silicon nitride: processing and anisotropic properties.
Textured silicon nitride (Si3N4) has been intensively studied over the past 15 years because of its use for achieving its superthermal and mechanical properties. In this review we present the fundamental aspects of the processing and anisotropic properties of textured Si3N4, with emphasis on the anisotropic and abnormal grain growth of β-Si3N4, texture structure and texture analysis, processing...
متن کاملLoose powder detection and surface characterization in selective laser sintering via optical coherence tomography
Defects produced during selective laser sintering (SLS) are difficult to non-destructively detect after build completion without the use of X-ray-based methods. Overcoming this issue by assessing integrity on a layer-by-layer basis has become an area of significant interest for users of SLS apparatus. Optical coherence tomography (OCT) is used in this study to detect surface texture and sub-sur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Ceramic Society of Japan
سال: 2000
ISSN: 0914-5400,1882-1022
DOI: 10.2109/jcersj.108.1261_790