Surface Oxide Films on Titanium Alloys Regenerated in Hanks’ Solution
نویسندگان
چکیده
منابع مشابه
Surface analysis of anodic oxide films containing phosphorus on titanium.
PURPOSE To examine the effect of phosphoric acid solution on the anodic oxide film of titanium. MATERIALS AND METHODS Commercially pure grade 2 titanium specimens were prepared and anodized in phosphoric acid solution at a constant current density (70 A/m2). Specimens were evaluated by means of scanning electron microscopy, x-ray diffraction analysis, electron probe microanalysis, energy-disp...
متن کاملUltra - thin Titanium Oxide Films on
Accession #s 00936, 00937,00938 Mo(112), Measured by XPS Technique: XPS Host Material: #00936: Mo(112) Dheeraj Kumar, Ming Shu Chen, and David W. Goodman) single crystal; #00937: Si02 thin film on MO(112); #00938: TiO, thin Texas A&M University, Department of Chemistl)', College Station, Texas 77842-_Wl2 film on SiO,lMo(112) (Received 26 August 2005; accepted II August 2006; published 28 Decemb...
متن کاملTitanium oxide films grown on Mo(110)
Ordered titanium oxide films were prepared on an Mo(110) substrate under ultrahigh vacuum conditions and characterized by various vacuum surface analytical techniques. Using different preparation methods, the titanium oxide films exhibit two low-energy electron diffraction patterns: a (1×1) rectangular pattern and a (1×1) hexagonal pattern. Auger electron spectroscopy, high-resolution electron ...
متن کاملA Novel Surface Treatment for Titanium Alloys
High-speed commercial aircraft require a surface treatment for titanium (Ti) alloy that is both environmentally safe and durable under the conditions of supersonic flight. A number of pretreatment procedures for Ti alloy requiring multi-stages have been developed to produce a stable surface. Among the stages are, degreasing, mechanical abrasion, chemical etching, and electrochemical anodizing. ...
متن کاملSurface Characterization and Tribological Behaviour of Ti-Ni-P Intermetallic Coatings on Titanium Alloys
In this research, tribological behavior of Ti-Ni-P intermetallic coatings on titanium substrates have been investigated under dry reciprocating conditions. Hardness profile testing results exhibit that high surface hardness has been attained and static indentation result shows that the intermetallic coating has better adhesion strength than the conventional ceramic coatings. In this respect, th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATERIALS TRANSACTIONS
سال: 2002
ISSN: 1345-9678,1347-5320
DOI: 10.2320/matertrans.43.3000