Surface replication with one-nanometer.level smoothness by a nickel electroforming process
نویسندگان
چکیده
منابع مشابه
Nickel Plating and Electroforming
The material presented in this publication has been prepared for the general information of the reader and should not be used or relied on for specific applications without first securing competent advice. The Nickel Development Institute, its members, staff and consultants do not represent or warrant its suitability for any general or specific use and assume no liability or responsibility of a...
متن کاملSIMULATION OF NICKEL ELECTROFORMING PROCESS OF A REVOLVING PART USING FINITE ELEMENT METHOD
n this paper a finite element model has been proposed for evaluation of primary and secondary current density values on the cathode surface in nickel electroplating operation of a revolving part. In addition, the capability of presented electroplating simulation has been investigated in order to describe the electroplated thickness of the nickel sulfate solution. Nickel electroplating experi...
متن کاملEvaluation of surface smoothness detected by a periodontal probe.
An investigation was designed to determine whether or not the required smoothness has been reached. This is still a controversial subject among clinicians. Ten cylindrical metal samples of equal sizes with various degrees of smoothness were prepared, and their degrees of smoothness were assessed in a blind manner by 14 periodontists, who were asked to group them as smooth or rough using a perio...
متن کاملElectroforming Process in Metal-Oxide-Polymer Resistive Switching Memories
Electroforming of an Al/Al2O3/polymer/Al resistive switching diode is reported. Electroforming is a dielectric soft-breakdown mechanism leading to hysteretic current– voltage characteristics and non–volatile memory behavior. Electron trapping occurs at early stages of electroforming. Trapping is physically located at the oxide/polymer interface. The detrapping kinetics is faster under reverse b...
متن کاملPaper and Cardboard Industries Wastewater Treatment by Coagulation and Flocculation Process and Optimization with Response Surface Methodology: A Laboratory Study
Background and Objectives: Wastewater treatment of paper recycling and cardboard industries with the aim of water recycling and reducing environmental impact is one of the daily needs of industries. Therefore, the aim of the present study was to optimize the conditions of coagulation and flocculation process in wastewater treatment of paper recycling industries using the response surface method...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Electrical Machining
سال: 2011
ISSN: 1341-7908,2188-5117
DOI: 10.2526/ijem.16.21