SURFACE ROUGHNESS MODELING DURING ELECTRIC DISCHARGE GRINDING WITH VARIABLE POLARITY OF ELECTRODES
نویسندگان
چکیده
The article presents the probabilistic-statistical modeling of surface roughness in process electric discharge grinding with variable polarity electrodes. correlation between modes machining and indicators quality machined was established. A model part formed during is obtained, which establishes high-altitude parameters electrical modes. developed makes it possible to calculate height depending on grinding. microroughness determined by same conditions as depth erosion pits. It obtain low if are reduced.
منابع مشابه
Mathematical Modeling of Surface Roughness in Surface Grinding Operation
A mathematical model of the surface roughness has been developed by using response surface methodology (RSM) in grinding of AISI D2 cold work tool steels. Analysis of variance (ANOVA) was used to check the validity of the model. Low and high value for work speed and feed rate are decided from design of experiment. The influences of all machining parameters on surface roughness have been analyze...
متن کاملExperimental Investigation of Surface Roughness and Kerf Width During Machining of Blanking Die Material on Wire Electric Discharge Machine
Wire electric discharge machine (WEDM) is spark erosion in unconventional machining technique to cut hard and the conductive material with a wire as an electrode. The blanking die material SKD 11 is a high carbon and high chromium tool steel with high hardness and high wearing resistance property. This tool steel has broad application in press tools and dies making industries. In this research ...
متن کاملPrediction of Surface Roughness in Wire Electric Discharge Machining (WEDM) Process based on Response Surface Methodology
This paper presents an investigation on WEDM of pure titanium (grade-2). An attempt has been made to model the response variable i.e. surface roughness in WEDM process using response surface methodology. The experimental plan is based on Box-Behnken design. Six parameters i.e. pulse on time, pulse off time, peak current, spark gap voltage, wire feed and wire tension has been varied to investiga...
متن کاملSurface modification by electric discharge implemented with electrodes composed of carbon nanotubes.
In this work the electric discharge machining (EDM) implementing with multi-wall carbon nanotubes (MWCNT) as a miniscule electrode for pursuing precise surface modification was studied. The excellent upright growth of carbon nanotubes on copper based alloy substrates by a radio frequency (RF) assisted hot filament chemical vapor deposition (HFCVD) method suggests us to exploit MWCNTs as the min...
متن کاملElectric discharge during electrosurgery
Electric discharge utilized for electrosurgery is studied by means of a recently developed method for the diagnostics of small-size atmospheric plasma objects based on Rayleigh scattering of microwaves on the plasma volume. Evolution of the plasma parameters in the near-electrode sheaths and in the positive column is measured and analyzed. It is found that the electrosurgical system produces a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ??????? ? ?????????? ? ??????????????? ????????
سال: 2021
ISSN: ['2078-7405']
DOI: https://doi.org/10.20998/2078-7405.2021.94.09