Surface Roughness of Milled Sheet Molding Compound Composites

The surface roughness and gloss of composites.

The contrast gloss and the average roughness were measured for four commercial composite filling materials. Using a factorial design, each material was subjected to four available finishing methods. A significant difference was found in the contrast gloss among finishing methods, and a significant linear regression is given which relates the inverse of the contrast gloss to the average roughnes...

ICESat measurement of Greenland ice sheet surface slope and roughness

The Ice, Cloud and land Elevation Satellite (ICESat) in its 8 day repeat orbit mode provided data not only on the along-track surface slope, but also on the cross-track surface slope from adjacent repeat ground tracks. During the first 36 days of operation, four to five such repeat orbits occurred within 1 km in the cross-track direction. This provided an opportunity to use ICESat data to measu...

Influence of polishing duration on surface roughness of resin composites.

There is a need for effective polishing instruments for resin composite restorations with highly polished surfaces. The purpose of this study was to investigate the influence of polishing duration on surface roughness of light-cured resin composites. Four polishing systems, Compomaster (Shofu), Silicone Points C Type (Shofu), Super Snap (Shofu) and Enhance Finishing and Polishing System (Dentsp...

Characterizing the Mechanical Properties of Callaways Forged Carbon Fiber Reinforced Sheet Molding Compound

Volumetrical Characterization of Sheet Molding Compounds

For a comprehensive study of Sheet Molding Compound (SMC) surfaces, topographical data obtained by chromatic confocal imaging were submitted systematically for the development of a profile model to understand the formation of cavities on the surface. In order to qualify SMC surfaces and to predict their coatability, a characterization of cavities is applied. To quantify the effect of surface mo...