Surface roughness of real operationally used compressor blade and blisk
نویسندگان
چکیده
منابع مشابه
Life Estimate of a Compressor Blade through Fractography
Failure analysis of fractured components provides some information about the causes and conditions of fracture. Fractography is an indispensable part of the failure analysis as it is usually the only means by which the failure mechanism can be established. By using fractography, some information such as component’s life, values of the stress intensity factor and the applied stress can be calcul...
متن کاملEffect of aging and manufacturing tolerances on multi-stage transonic axial compressor performance
The Axial compressor is an integrated part of a gas turbine. The central part of compressors is its blades. Blade aerodynamic has a significant effect on compressor performance. Because of the adverse pressure gradient in the compressor, any deviation in the blade profile has a significant influence on the flow field as well as the compressor performance. During the manufacturing and operation ...
متن کاملLubrication Characteristics Between Bush And Blade Of Swing Compressor
This paper presents the lubrication characteristics between a bush and a blade of a swing compressor that was developed for a new type of compressor for an air conditioner using alternative refrigerants. The mixed lubrication analysis that simultaneously solved the motion equations of the bush and the blade, the lubrication equation and the rough surface contact equation was performed. Moreover...
متن کاملPresenting Three Design Methods for Axial Compressor Blade via Optimization
Improving the efficiency of compressors has been one of the most important goals of researchers over the years. In this paper, three different methods are presented for parameterization and blade optimization of axial flow compressor. All methods consist of flow analysis tool, optimization algorithms, and parametric geometry generation tool, that are different in each approach. Objective functi...
متن کاملSurface Roughness of Aircraft Engine Blade Models Produced with Various Methods of Rapid Prototyping
Results of the study of surface roughness of the aircraft engine blade model, produced with various methods of rapid prototyping are presented. Blade models were made with two incremental methods of rapid prototyping: stereo lithography (SLA-250 device) and three-dimensional printing (Z510 Spectrum printer). In incremental methods of rapid prototyping a model is formed by hardening of consecuti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering
سال: 2019
ISSN: 0954-4100,2041-3025
DOI: 10.1177/0954410019843438