Surface Roughness Optimization Of Machining Parameters In Machining Of Composite Materials
نویسندگان
چکیده
منابع مشابه
Influence of machining parameters on surface roughness and dry friction
Article history: Received 6 October, 2015 Accepted 7 March 2016 Available online 8 March 2016 Dry friction depends on the surface topography which, in turn, is governed by machining parameters in addition to several other factors,. Therefore, in order to establish a qualitative relationship among these factors, the surface roughness and coefficient of static friction are measured for specimens ...
متن کاملMachining of Fibre Reinforced Plastic Composite Materials
Fibre reinforced plastic composite materials are difficult to machine because of the anisotropy and inhomogeneity characterizing their microstructure and the abrasiveness of their reinforcement components. During machining, very rapid cutting tool wear development is experienced, and surface integrity damage is often produced in the machined parts. An accurate selection of the proper tool and m...
متن کاملA Review on Optimization of Machining Parameters for Different Materials
For the new products, it is necessary to acquire new technologies to produce and process them. Mostly the product quality depends upon on the surface roughness, fatigue life improvement, corrosion resistance, aesthetics, precision fit of mating surfaces etc., because this affects on product quality. This paper provides literature review on machining parameters, such as cutting speed (Vc), feed ...
متن کاملSurface Roughness, Machining Force and FlankWear in Turning of Hardened AISI 4340 Steel with Coated Carbide Insert: Cutting Parameters Effects
The current experimental study is to investigate the effects of process parameters (cutting speed, feed rate and depth of cut) on performance characteristics (surface roughness, machining force and flank wear) in hard turning of AISI 4340 steel with multilayer CVD (TiN/TiCN/Al2O3) coated carbide insert. Combined effects of cutting parameter (v, f, d) on performance outputs (Ra, Fm and VB) ar...
متن کاملinvestigation of machining parameters in wire electrical discharge machining (wedm) on the surface roughness & cutting speed of tungsten carbide
surface roughness is one of the most important parameters that plays very critical role in determining the quality of engineering components. a good surface quality resulting in improve of fatigue strength, corrosion and wear resistance of the workpiece. on the other hand, increasing cutting speed and decreasing time of machining are desirable for manufacturers in order to reduce costs and incr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: International Journal of Applied Research in Mechanical Engineering
سال: 2011
ISSN: 2231-5950
DOI: 10.47893/ijarme.2011.1006