Synchronous Vibration Measurements for Shrouded Blades Based on Fiber Optical Sensors with Lenses in a Steam Turbine
نویسندگان
چکیده
منابع مشابه
Weight Measurements by Using Simple Optical-Fiber Sensors (RESEARCH NOTE)
The use of different optical-fiber sensors for weighing measurements is Abstract described. By using three different mechanical stressing mechanisms, the operation of the fiber-to-fiber transducer systems are tested and the results are presented. Parameters such as sensitivity, hysteresis, resolution, and dynamic range are measured. A comparison of the results has shown that the sensor system m...
متن کاملVibration analysis of a steam turbine blade
ABSTRACT Blade failure is a common problem of a steam turbine and it’s failure in-service results in safety risks, repair cost and non operational revenue losses. Thus, the reliability of these blades is very important for the successful operation of a steam turbine. Dynamic analysis of a steam turbine blade in computational environment is carried out in the present work. In order to gain physi...
متن کاملIn-situ laser repair of steam turbine blades
Reliable and efficient power generation is a major global issue due to both political and environmental concerns. Nevertheless many critical components, particularly the blades of the low pressure (LP) side of power generating steam turbines, are subjected to failure due to severe erosion at the leading edges. Since taking machines off-line for maintenance and removal of damaged blade for repai...
متن کاملA Fiber Optical Sensor For Non–Contact Vibration Measurements
Vibration tests are widely employed in many industrial fields, and in particular in aerospace industry to evaluate the mechanical behavior of parts for aircrafts and satellites. Usually, these tests are carried out with shakers, while inertial accelerometers are used to measure the shaker table acceleration from which the vibration amplitude is computed. Some applications require the measuremen...
متن کاملVibration and Crack Detection in Gas Turbine Engine Compressor Blades using Eddy Current Sensors
High cycle fatigue (HCF) cracks generated by compressor blade vibrations are a common source of failure in gas turbine engines. Current methods for crack detection are costly, time consuming, and prone to errors. In-situ blade vibration detection would help operators avoid critical engine speeds, and help infer the presence of cracks via a change in the mode of a blade. Blade vibrations can be ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19112501