Synthesis of activated carbon derived from chicken feather for Li-ion batteries through chemical and physical activation process
نویسندگان
چکیده
Abstract The use of activated carbon from biomass as an electrode for lithium-ion batteries is promising because the low cost, natural abundance, and environmentally friendly. Chicken feather a that has potential to be source carbon, it contains keratin. activation process affects quality thereby increasing battery performance. In this study, chicken waste was chemically using KOH combined with physical at temperature variations 750, 850 950 °C. significantly influenced electrochemical properties difference in their microstructure. pyrolyzed °C (CFCA-850) shows highest discharge capacity 285.78 mAhg −1 , good cycling stability rate performance due its higher interlayer spacing large surface area. Furthermore, electronic conductivity ion increase, thus improve
منابع مشابه
Hydrothermal synthesis of organometal halide perovskites for Li-ion batteries.
A facile hydrothermal method was developed to prepare CH3NH3PbBr3 and CH3NH3PbI3. The as-prepared products were utilized in lithium batteries as anode materials with good performance. Considering the structural diversity, more hybrid perovskites can be targets for further optimization, indicating their promising potential in Li-ion battery applications.
متن کاملBio-Derived, Binderless, Hierarchically Porous Carbon Anodes for Li-ion Batteries
Here we explore the electrochemical performance of pyrolyzed skins from the species A. bisporus, also known as the Portobello mushroom, as free-standing, binder-free, and current collector-free Li-ion battery anodes. At temperatures above 900 °C, the biomass-derived carbon nanoribbon-like architectures undergo unique processes to become hierarchically porous. During heat-treatment, the oxygen a...
متن کاملSynthesis of Hard Carbon- Silicon Nanocomposite as Anode Active Material for Lithium-Ion Batteries
In this research, using phenolic resin as the precursor of carbon and various amounts of ethylene glycol as a pore former, porous samples of hard carbon were synthesized. Samples were characterized by x-ray diffraction (XRD) and N2 adsorption-desorption methods. Broad diffraction peaks represent the amorphous structure of samples. Moreover, the gas adsorption-desorption curves showed that the a...
متن کاملFacile Synthesis of Non-Graphitizable Polypyrrole-Derived Carbon/Carbon Nanotubes for Lithium-ion Batteries
Graphite is usually used as an anode material in the commercial lithium ion batteries (LIBs). The relatively low lithium storage capacity of 372 mAh g(-1) and the confined rate capability however limit its large-scale applications in electrical vehicles and hybrid electrical vehicles. As results, exploring novel carbon-based anode materials with improved reversible capacity for high-energy-dens...
متن کاملElectrochemical properties of iron oxide nanoparticles as an anode for Li-ion batteries
The synthesis of iron oxide nano-particles by direct thermal decomposition was studied. Simultaneous thermal analysis and Fourier transform infrared spectroscopy results confirmed the formation of iron-urea complex, and disclosed iron oxide formation mechanism. Calcination of the iron-urea complex at 200°C and 250°C for 2 hrs. resulted in the formation of maghemite along with hematite as a seco...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials for renewable and sustainable energy
سال: 2021
ISSN: ['2194-1459', '2194-1467']
DOI: https://doi.org/10.1007/s40243-021-00198-6