Synthesis of porous Al2TiO5 ceramic by reaction sintering method

Sintering properties of zirconia-based ceramic composite

This study examines the effects of different ZrB2 content on various mechanical properties and electrical conductivity of ZrB2/Y-TZP composite. Composites with ZrB2 content of up to 20 wt-% were particularly beneficial at the lower sintering temperature range by achieving greater densification and better hardness than Y-TZP monolith. In contrast to the trends estimated from rule of mixture, the...

Synthesis of Hydroxyapatite Bio-Ceramic Powder by Hydrothermal Method

Hydroxyapatite bio-ceramic powder was synthesized using waste eggshells as calcium source by a straight forward thermal method. The process is carried out at high temperature. Different calcium phosphate phases were obtained just by changing the thermal treatment. HAp is the only apatite present in the reaction products, along with minute fractions of other calcium compounds. The final product ...

Advanced Sintering of Nano-Ceramic Materials

8YSZ sintering by flash sintering method and evaluation of process parameters

Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...

Selective Laser Sintering of Porous Silica Enabled by Carbon Additive

The aim of this study is to investigate the possibility of a freeform fabrication of porous ceramic parts through selective laser sintering (SLS). SLS was proposed to manufacture ceramic green parts because this additive manufacturing technique can be used to fabricate three-dimensional objects directly without a mold, and the technique has the capability of generating porous ceramics with cont...