Synthesis of Wall-thickness-controllable BiFeO3 Nanotubes by Sol-Gel Method
نویسندگان
چکیده
منابع مشابه
Synthesis of zirconium carbide nanoparticles by sol-gel method and determination of powder characteristics
In this study, zirconium carbide nanoparticles were synthesized by the sol-gel method in the alcoholic system. The sol was prepared in a three-component alkoxide-water-alcohol system based on the chemical sol-gel process under acidic conditions and at pH = 5. Zirconium n-propoxide, furfuryl alcohol were used as raw materials. After the hydrolysis process and formation of the gel, the initial po...
متن کاملSynthesis, characterization, of Fluorohydroxyapatite nanopowders by sol-gel processing
In this work, sol-gel processing was used to synthesize the fluorohydroxyapatite (nano-FHA, Ca10(PO4)6(OH)2−xFx) nanopowders. The advantages of the sol-gel method over other methods are precise control of composition, low processing temperature, and better homogeneity. Calcium nitrate tetrahydrate, phosphorous pentoxide and Tetrabuthylammon...
متن کاملSynthesis of nanosized TiO2 powder by Sol-Gel method in acidic conditions
The preparation of nano-sized TiO2 by titanium tetraisopropoxide (Ti(OiPr)4) via sol-gelmethod using acid as a catalyst is investigated and the optimized conditions concerning theproportional amount of acid, water, alcohol is established by XRD and SEM. The effect ofcalcination temperature on phase transformation of TiO2 (rutile, anatase and brookite) wasdetermined by XRD. The smallest grain si...
متن کاملSynthesis and characterization of the Pt/SiO2 nanocomposite by the sol-gel method
The silica supported platinum nanoparticles was synthesized by using the sol-gel method. The possibility of using diamminedinitro platinum (II) as Pt precursor and effect of metal precursor concentration on the final Pt nanoparticle size was investigated. A stable silica sol was prepared via hydrolysis of tetraethyl orthosilicate (TEOS) as a metal alcoxide and condensation reaction. Subsequentl...
متن کاملSynthesis and characterizations of CoTiO3-clay nanocomposites by sol-gel method
CoTiO3-clay nano-composites were synthesized via a conventional sol-gel method; the gel was calcinated at 500 - 800°C for 2 hours. The presence of rhombohedra phase of CoTiO3 in clay matrix was confirmed by XRD, FTIR, SEM. Cobalt titanate-clay nano-composites were prepared with 5-20%(w/w) by sol-gel method. The spectra results were investigated at 20% (w/w) concentration .The optimum condition ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors and Materials
سال: 2018
ISSN: 0914-4935
DOI: 10.18494/sam.2018.1855