SYSTEM MODAL IDENTIFICATION USING FREE VIBRATION DATA

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Modal shape identification of the vibration data of bridge dynamic test using fuzzy clustering

The transmission of vibration to the adjacent buildings due to the traffic passing over Ghalemorghi Bridge in Tehran. has caused disruption to the inhabitants of the buildings. In order to investigate the vibration condition of the bridge, a dynamic loading test was performed and the output was analyzed using a non-parametric modal identification approach. In this article, the non-parametric mo...

متن کامل

Modal Identification Study of Vincent Thomas Bridge Using Simulated Wind-Induced Ambient Vibration Data

In this article, wind-induced vibration response of Vincent Thomas Bridge, a suspension bridge located in San Pedro near LosAngeles, California, is simulated using a detailed three-dimensional finite element model of the bridge and a state-of-the-art stochastic wind excitation model. Based on the simulated wind-induced vibration data, the modal parameters (natural frequencies, damping ratios, a...

متن کامل

Identification of Nonlinear Modal Interactions in a Beam-Mass-Spring-Damper System based on Mono-Frequency Vibration Response

In this paper, nonlinear modal interactions caused by one-to-three internal resonance in a beam-mass-spring-damper system are investigated based on nonlinear system identification. For this purpose, the equations governing the transverse vibrations of the beam and mass are analyzed via the multiple scale method and the vibration response of the system under primary resonance is extracted. Then,...

متن کامل

Analysis of the Free Vibration of a Coupled Plate/Fluid Interacting System and Interpretation using Sub-system Modal Energy

This paper describes a method for describing and quantifying the vibratory behaviour of interacting structural/fluid systems based upon reference to the relative energy associated with each of the sub-systems. The particular case selected is that of a circular plate in interaction with a cylindrical fluid cavity. A theoretical analysis is performed, based upon the Euler Bernoulli and Helmhotz e...

متن کامل

modal parameter identification using ambient vibration testing with introducing a new software

the ambient vibration measurement is a kind of output data-only dynamic testing where the traffics and winds are used as agents responsible for natural or environmental excitation. therefore an experimental modal analysis procedure for ambient vibration testing needs to base itself on output-only data. the modal analysis involving output-only measurements present a challenge that requires the u...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Doboku Gakkai Ronbunshu

سال: 1989

ISSN: 0289-7806,1882-7187

DOI: 10.2208/jscej.1989.410_47