Taber vibration isolator for vacuum and cryogenic applications
نویسندگان
چکیده
منابع مشابه
Taber vibration isolator for vacuum and cryogenic applications
We present a procedure for the design and construction of a passive, multipole, mechanical high-stop vibration isolator. The isolator, consisting of a stack of metal disks connected by thin wires, attenuates frequencies in the kilohertz range, and is suited to both vacuum and cryogenic environments. We derive an approximate analytical model and compare its predictions for the frequencies of the...
متن کاملMechatronic Vibration Isolator for the Microtechnics with Real-time Interaction
A mechatronic vibration isolation system has been developed on the basis of system theory. This equipment integrates mechanics, pneumatics and electronics in synergistic co-operation. The electronic control is responsible for the dynamic behaviour and the special computing transfer block for the real time interaction and compensation of floor vibration disturbances. INTRODUCTION The method for ...
متن کاملMicrowave Ferrites for Cryogenic Applications
Recent advances in microwave ferrite device technology have seen the introduction of superconductivity that virtually eliminates insertion losses due to electrical conduction in microstrip circuits. The conventional ferrimagnetic spinel and garnet compositions, however, are not generally optimized for temperatures in the vicinity of 77 K and may require chemical redesign in order to realize the...
متن کاملThe Development of an Intelligent Hybrid Active-passive Vibration Isolator
A hybrid active-passive vibration isolator made up of electromagnetic actuator and air spring in parallel can be used to effectively isolate the broadband and line spectrum vibration of mechanical equipment simultaneously. However, due to its reliability and safety problems caused by the impact, its application in ships is limited. In this paper, an impactresistant structure and an air gap self...
متن کاملOn Parameter Study of Cubic Nonlinear Vibration Isolator
The purpose of optimizing isolator parameters is to have a system that is stiff at low frequency but soft in high frequency. However, in this case a small amount of transmitted force will cause a large displacement in isolator. Exceeding the allowable relative displacement may cause serious damage to the system. Therefore a trade off between the transmitted force, which is indicated by absolute...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Review of Scientific Instruments
سال: 1999
ISSN: 0034-6748,1089-7623
DOI: 10.1063/1.1149839