Taguchi Optimization In Machining Inconel 600 With WEDM Process Using Cryogenically Treated Brass Wire

Optimization of wire electrical discharge machining (WEDM) process parameters using Taguchi method

Wire electrical discharge machining (WEDM) is extensively used in machining of conductive materials when precision is of prime importance. Rough cutting operation in WEDM is treated as a challenging one because improvement of more than one machining performance measures viz. metal removal rate (MRR), surface finish (SF) and cutting width (kerf) are sought to obtain a precision work. Using Taguc...

Optimization of Process Parameters in Wire Electrical Discharge Machining of Inconel X-750 for Dimensional Deviation Using Taguchi Technique

Optimization of wire electrical discharge machining (WEDM) process parameters using genetic algorithm

Wire electrical discharge machining (WEDM) is a special form of traditional electrical discharge machining in which the electrode is a continuously moving conducting wire. The mechanism of metal removal in wire electrical discharge machining involves the complex erosion effect from electric sparks generated by a pulsating direct current power supply. The sparks generated between two closely spa...

Optimization of Process Parameters of Wire Electrical Discharge Machining Using Fuzzy logic Integrated with Taguchi Method

In this paper, fuzzy logic integrated with the Taguchi method is used to optimize Wire Electro Discharge Machining (WEDM) process with multiple quality characteristics. Rough machining with EDM gives poor surface finish and has micro cracks and pores. Finish machining gives better surface finish but with very poor machining speed (MRR). Spark gap width is one of the important performance measur...

Optimization of Process Parameter of Wire Electrical Discharge Machine by Response Surface Methodology on Inconel-600

in the present paper, the study has been made to optimize the process parameters during machining of Inconnel-600 by wire electrical discharge machining (WEDM) using response surface methodology (RSM). Four input process parameters of WEDM (namely Peak Current (IP), Pulse-On time (TON), Pulse-Off time (TOFF) and Wire Feed rate (WF)) were chosen as variables to study the process performance in t...