Tailoring the low-density polyethylene - thermoplastic starch composites using cellulose nanocrystals and compatibilizer
نویسندگان
چکیده
منابع مشابه
Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer
In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...
متن کاملThermo-Oxidation and Biodegradation Study of Low-Density Polyethylene /Starch Films by IR Spectroscopy
This article reports a study of the thermo-oxidation and biodegradation in the soil of low-density polyethylene/starch films (LDPE/starch) by infrared spectroscopy: Films of LDPE/Starch blends of different composition (starch content range from 0 to 15% w/w),were prepared and exposed to thermo-oxidation at different temperatures at 80, 90 and 100°C,and buried in the soil of public dump duri...
متن کاملGreen Composites Comprising Thermoplastic Corn Starch and Various Cellulose-Based Fillers
Starch microparticles (SM) were prepared by delivering ethanol as the precipitant into a starch paste solution dropwise. Chemically modified starch microparticles (CSM) were fabricated by a reaction with malic acid using the dry-preparation technique. Composites were prepared using CSM and various cellulose materials as fillers within glycerol plasticized– corn starch matrix through the casting...
متن کاملDynamic Mechanical Analysis of Compatibilizer Effect on the Mechanical Properties of Wood Flour-High-Density Polyethylene Composites
In this study, effect of MAPE (maleic anhydride polyethylene) as the compatibilizer on the mechanical properties of wood-flour polyethylene composites has been investigated by using Dynamic Mechanical Analysis (DMA). Composites were made at 25% and 50% by weight fiber contents and 1% and 2% compatibilizer respectively. Controls were also made at the same fiber contents without the compatibilize...
متن کاملThermoplastic starch/wood composites: interfacial interactions and functional properties.
Thermoplastic starch (TPS)/wood composites were prepared from starch plasticized with 36 wt% glycerol. The components were homogenized by dry-blending, extruded and injection molded to tensile bars. Tensile properties, structure, deformation, water adsorption and shrinkage were determined as a function of wood content, which changed between 0 and 40 vol% in 7 steps. The modification of TPS with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Polymer Testing
سال: 2021
ISSN: 0142-9418
DOI: 10.1016/j.polymertesting.2020.107007