Target study for heavy ion beam fusion

Beam Imaging Diagnostics for Heavy Ion Beam Fusion Experiments*

We are developing techniques for imaging beams in heavy-ion beam fusion experiments in the HIF-VNL in 2 to 4 transverse dimensions. The beams in current experiments range in energy from 50 keV to 2 MeV, with beam current densities from <10 to 200 mA/cm, and pulse lengths of 4 to 20 μs. The beam energy will range up to 10 MeV in near-future beam experiments. The imaging techniques, based on kapt...

Beam Dynamics in Heavy Ion Fusion

for current multiplication, and it is there that the main challenges of beam dynamics are found. It is being studied in Europe, Russia, and Japan, and is discussed in ref. [1]. A standard design for heavy ion fusion drivers under study in the US. is an induction linac with electrostatic focusing at low energy and magnetic focusing at higher energy. The need to focus the intense beam to a fewmil...

A Scaled Beam-combining Experiment for Heavy Ion Inertial Fusion

Transverse beam combining is a cost-saving option employed in many designs for induction linac heavy ion fusion drivers. The resultant transverse emittance increase, due predominantly to anharmonic space charge forces, must be kept minimal so that the beam remains focusable at the target. A prototype combining experiment has been built and preliminary results are presented. Four sources each pr...

Cluster Ion Beam Polishing for Inertial Confinement Fusion Target Capsules

Heavy Ion Fusion Systems Assessment Study

The Heavy Ion Fusion Systems Assessment (HIFSA) study was conducted with the specific objective of evaluating the prospects of using induction linac drivers to generate economical electrical power from inertial confinement fusion. The study used algorithmic models of representative components of a fusion system to identify favored areas in the multidimensional parameter space. The resulting cos...