Targeted Additive Micromodulation of Grain Size in Nanocrystalline Copper Nanostructures by Electrohydrodynamic Redox 3D Printing (Small 51/2022)
نویسندگان
چکیده
Nanocrystalline Copper Nanostructures In article 2205302, Maxence Menétrey and co-workers present a novel approach for microstructure control in nanopillars synthesized by electrohydrodynamic redox 3D printing. Variations the deposition voltage allow on-the-fly grain size modulation additively manufactured nanostructures.
منابع مشابه
Grain size limit of nanocrystalline materials obtained by annealing glasses
A lower limit for the grain size of nanocrystalline solids obtained by crystallization of the glass and its dependency on the crystallization temperature are thermodynamically considered. It is found that the nanocrystalline materials have the smallest grain size when the crystallization temperature is roughly half of the melting temperature. At this temperature, the Gibbs free energy differenc...
متن کاملFunctional protein microarrays by electrohydrodynamic jet printing.
This paper reports the use of advanced forms of electrohydrodynamic jet (e-jet) printing for creating micro- and nanoscale patterns of proteins on various surfaces ranging from flat silica substrates to structured plasmonic crystals, suitable for micro/nanoarray analysis and other applications in both fluorescent and plasmonic detection modes. The approaches function well with diverse classes o...
متن کاملCollodial cluster arrays by electrohydrodynamic printing.
A "stable" electrohydrodynamic jet is used to print arrays of colloidal suspensions on hydrophobic surfaces. Printed lines break up into sessile drops, and capillary forces guide the self-assembly of colloidal particles during the evaporation of the liquid, resulting in arrays of colloidal single particles or particle clusters depending on the concentration of the suspensions. The clusters diff...
متن کاملThe Role of Grain Size on Neutron Irradiation Response of Nanocrystalline Copper
The role of grain size on the developed microstructure and mechanical properties of neutron irradiated nanocrystalline copper was investigated by comparing the radiation response of material to the conventional micrograined counterpart. Nanocrystalline (nc) and micrograined (MG) copper samples were subjected to a range of neutron exposure levels from 0.0034 to 2 dpa. At all damage levels, the r...
متن کاملGrain-size dependence of plastic deformation in nanocrystalline Fe
Plastic deformation of nanocrystalline Fe was investigated by nanoindentation. Samples, synthesized by mechanical attrition, consisted of powder particles with diameters greater than 30 mm. The average grain diameters within the particles of different samples ranged from 10 nm to 10 mm. To avoid potential artifacts, samples were prepared without use of heat treatment, and measurements were cond...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Small
سال: 2022
ISSN: ['1613-6829', '1613-6810']
DOI: https://doi.org/10.1002/smll.202270276