Targeted rework strategies for powder bed additive manufacture
نویسندگان
چکیده
منابع مشابه
Numerical Investigations on Hatching Process Strategies for Powder Bed Based Additive Manufacturing using an Electron Beam
This paper extends 3D simulation results of layer hatching process strategies for additive manufacturing by electron beam melting (EBM) applications to exploit the future energy potential of electron guns with higher beam power. The physical model, discretized by a three dimensional thermal lattice Boltzmann method, is briefly presented. The numerical implementation is validated on the basis of...
متن کاملPredictive Simulation of Process Windows for Powder Bed Fusion Additive Manufacturing: Influence of the Powder Bulk Density
The resulting properties of parts fabricated by powder bed fusion additive manufacturing processes are determined by their porosity, local composition, and microstructure. The objective of this work is to examine the influence of the stochastic powder bed on the process window for dense parts by means of numerical simulation. The investigations demonstrate the unique capability of simulating ma...
متن کاملContact-Free Support Structures for Part Overhangs in Powder-Bed Metal Additive Manufacturing
This study investigates the feasibility of a novel concept, contact-free support structures, for part overhangs in powder-bed metal additive manufacturing. The intent is to develop alternative support designs that require no or little post-processing, and yet, maintain effective in minimizing overhang distortions. The idea is to build, simultaneously during part fabrications, a heat sink (calle...
متن کاملResidual Stress in Metal Parts Produced by Powder-Bed Additive Manufacturing Processes
In this study, residual stresses from the electron beam additive manufacturing (EBAM) and selective laser melting (SLM) processes, due to repeated thermal cycles, were investigated. Residual stresses play a crucial role in part performance, and thus, it is critical to evaluate the process-induced residual stresses in AM parts. Ti-6Al-4V and Inconel 718 parts produced by EBAM and SLM, respective...
متن کاملMesoscopic Simulation of Heat Transfer and Fluid Flow in Laser Powder Bed Additive Manufacturing
Laser-powder bed fusion (L-PBF) additive manufacturing involves complex physics such as heat transfer and molten metal flow, which have a significant influence on the final build quality. In this study, transport phenomena based modeling is used to provide a quantitative understanding of complex molten pool transients. In particular, a three dimensional (3D), transient numerical model is develo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Additive Manufacturing
سال: 2018
ISSN: 2214-8604
DOI: 10.1016/j.addma.2017.11.011