Technical Points of Mannual Operation for CO2 Semi-Automatic Arc Welding
نویسندگان
چکیده
منابع مشابه
Elimination Back Gouging Operation in Submerged Arc Welding Butt without Chamfers ASTM A516 (TECHNICAL NOTE)
Submerged arc welding is used widely in oil and gas industry construction for storage tanks, pressure vessels, shipbuilding and etc. One of the processes of submerged arc welding is back gouging operations. This paper presents a way to remove the back gouging operation from the submerged arc welding process. For this purpose, effects of submerged arc welding parameters onA516-70steel sample wer...
متن کاملBlue-light hazard from CO2 arc welding of mild steel.
OBJECTIVES The objective was to quantify the blue-light hazard from CO(2) arc welding of mild steel. METHODS The spectral radiance of arcs in CO(2) arc welding of mild steel was measured for solid and flux-cored wires at welding currents of 120-480 A. Effective blue-light radiance and the maximum acceptable exposure duration were calculated from the spectral radiance using their definitions i...
متن کاملGeneration rate of carbon monoxide from CO2 arc welding.
OBJECTIVES CO poisoning has been a serious industrial hazard in Japanese workplaces. Although incomplete combustion is the major cause of CO generation, there is a risk of CO poisoning during some welding operations. The aim of the present study was to evaluate the generation rate of CO from CO2 arc welding under controlled laboratory conditions and estimate the ventilation requirements for the...
متن کاملnew arc starter and cycle- by- cycle current control strategy for improving the operation of inverter based arc welding supply
this paper presents a new arc starter circuit that is usable in manual metal arc welding (mma) power supplies. the proposed circuit uses an auxiliary circuit and a series coupling transformer for adding high frequency spikes to output dc voltage during arc striking. the proposed circuit is usable in inverter based arc welding supplies and it could result in a decrease of weigh, volume and expen...
متن کاملGas tungsten arc welding
Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Welding Society
سال: 1972
ISSN: 0021-4787,1883-7204
DOI: 10.2207/qjjws1943.41.1041