Techno-economic analysis of decentralized biomass processing depots
نویسندگان
چکیده
منابع مشابه
Techno-Economic Analysis of Hydrogen Production by Gasification of Biomass
Approach • Determine the cost and availability of the three candidate biomass feedstocks. • Design a process scheme for the production of hydrogen. • Determine optimal hydrogen production through the testing of various simulation cases. • Analyze research and simulation results to determine technical and economic feasibility. • Determine the commercialization barriers to the production of hydro...
متن کاملTechno-economic assessment of regional biomass use
An approach for techno-economic optimisation and for the analysis of industrial biomass use is proposed in this paper. The ARGUS model (German acronym for: allocation module for a computer-aided generation of environmental strategies for emissions), based on linear programming, has been implemented as one of the few models that investigates VOC emissions from approximately 40 industrial sectors...
متن کاملTechno-economic Analysis of Small Scale Electricity Generation from the Lignocellulosic Biomass
In this study, the techno-economic analysis of lignocellulosic biomass conversion to electricity in a small scale power plant was conducted. The proposed process is based on the thermal pathway of electricity production from a carbon content feed. Woods, forest and agricultural residues were considered as the biomass feed, which are available extensively in Iran. Besides, the process benefits n...
متن کاملTechno-economic analysis of wastewater sludge gasification: a decentralized urban perspective.
The successful management of wastewater sludge for small-scale, urban wastewater treatment plants, (WWTPs), faces several financial and environmental challenges. Common management strategies stabilize sludge for land disposal by microbial processes or heat. Such approaches require large footprint processing facilities or high energy costs. A new approach considers converting sludge to fuel whic...
متن کاملTechno-economic analysis of hybrid layered manufacturing
Subtractive manufacturing (CNC machining) has high quality of geometric and material properties but is slow, costly and infeasible in some cases; additive manufacturing (RP) is just the opposite. Total automation and hence speed is achieved in RP by compromising on quality. Hybrid Layered Manufacturing (HLM) developed at IIT Bombay combines the best features of both these approaches. It uses ar...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Bioresource Technology
سال: 2015
ISSN: 0960-8524
DOI: 10.1016/j.biortech.2015.07.009