Technological parameters determining the sintering process intensity
نویسندگان
چکیده
منابع مشابه
8YSZ sintering by flash sintering method and evaluation of process parameters
Flash sintering as a new sintering method for sintering of ceramic materials has been studied and effect of various parameter such as flash current density, time of flash and contact paste on properties of flash sintered 8YSZ samples has been investigated. Results showed it is possible to achieve high density in shorter time and lower temperature than conventional sintering methods. Samples cou...
متن کاملDetermination of Process Parameters for Electron Beam Sintering (EBS)
Additive Layer Manufacturing (ALM) methods, like Electron Beam Sintering (EBS) constitute an interesting process concerning the production of small series and customised products. However, transient effects occur during processing due to the different physical principles of an electron beam (EB). Thus, process knowledge from similar ALM technologies, for instance Selective Laser Melting, can no...
متن کاملDetermining the Optimum Process Parameters by Asymmetric Quality Loss Function
Huang presented a trade-off problem, taking both product quality and process adjustment cost into account, to determine the optimum parameters (i.e., the process mean and process variance) of the input characteristic in the transformation model. In Huang’s transformation model, the input characteristic, x, is assumed to be normally distributed and the output characteristic, y, is nominal-the-be...
متن کاملThe Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions
Copper is an interesting material for printed electronics inks because, for example, of its good conductivity and lower raw material price compared to silver. However, post-processing Cu inks is challenging because of non-conductive copper oxide. In this work, inkjet-printed Cu nanoparticle structures were sintered on a polyimide substrate with a continuous-wave 808-nm diode laser. Laser sinter...
متن کاملEffect of sintering process parameters on the properties of 3Y-PSZ ceramics
The effect of sintering process parameters on the properties of 3 mol% yttria partially stability zirconia (3Y-PSZ) ceramics has been investigated. The relative density of the sintered pellet rapidly increases from 70.5 to 93.6 % with rose temperature from 1473 to 1573 K. In addition, the relative density only slightly increases from 94.9 to 96.6 %, when rose sintered temperature from 1573 to 1...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Izvestiya. Ferrous Metallurgy
سال: 2021
ISSN: 2410-2091,0368-0797
DOI: 10.17073/0368-0797-2021-3-184-191