Technological parameters for welding polypropylene pipes into the socket at low temperatures
نویسندگان
چکیده
منابع مشابه
Quality Monitoring at Fusion Welding of Polyethylene High-density Pipes
D. Šoštarić, A. Pintarić, Faculty of Electrical Engineering, J. J. Strossmayer University of Osijek, Osijek, Croatia. I. Samardžić, Mechanical Engineering Faculty, J. J. Strossmayer University of Osijek, Slavonski Brod, Croatia. The paper presents the main parameters of fusion welding and their Off line analysis of Polyethylene high-density (PE-HD) pipes. By direct measurements of voltage and c...
متن کاملOptimization of the parameters of low-carbon steel (EN10130) welding using friction stir welding method
Friction-stir welding process is a novel method of solid state welding, which produces heat due to friction between the pin, the shoulder and the workpiece. This heat causes a paste area. Shoulder pressure and pin spin cause edges integration and lead to welding. In this study, firstly, the feasibility of welding of steel sheet (EN10130) with a thickness of 1.5mm has been tested by 58 experim...
متن کاملPerformance of electrical stimulated anaerobic baffled reactor for removal of typical pollutants from low-strength municipal wastewater at low temperatures
Background: Although anaerobic system has been successfully used for treating the strong industrial wastewater, its efficiency for low-strength wastewater as municipal wastewater is not satisfying. This study aimed to enhance the capability of an anaerobic baffled reactor (ABR) for treating municipal wastewater. Methods: A 7-L ABR with 5 compartments was operated for a 287-day period fed with ...
متن کاملCarbon Nanotube/Polypropylene Composite Particles for Microwave Welding
Multiwalled carbon nanotube (MWCNT)/ polypropylene (PP) composite particles with various compositions were prepared by mechanical grinding of PP microparticles and MWCNT powders in a mortar at room temperature. Scanning electron microscopy (SEM) revealed that PP particles were coated by MWCNTs, forming a core-shell structure. The electrical resistivity versus temperature behavior of MWCNT/PP co...
متن کاملInvestigation of Mechanical Features at Macroscopic Scale for Friction Stir Welding of Polypropylene Strengthened with 40% Glass Fiber
In this paper experimentally, the friction-stir welding of the polypropylene sheets with 40% glass fiber has been investigated. Comparison to other welding methods, the strength of the joint is the most important feature in this process. Many parameters such as tool geometry, rotational speed, linear velocity, and tilt angle are very important as input parameters in this type of welding. Theref...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal International Academy of Refrigeration
سال: 2018
ISSN: 1606-4313
DOI: 10.17586/1606-4313-2018-17-3-29-36