TEM Microstructure Examination of Weld HAZ in Microalloyed Steels
نویسندگان
چکیده
منابع مشابه
Equilibrium Model of Precipitation in Microalloyed Steels
The formation of precipitates during thermal processing of microalloyed steels greatly influences their mechanical properties. Precipitation behavior varies with steel composition and temperature history and can lead to beneficial grain refinement or detrimental transverse surface cracks. This work presents an efficient computational model of equilibrium precipitation of oxides, sulfides, nitri...
متن کاملEffect of Thermo-Mechanical Parameters on Microstructure and Mechanical Properties of Microalloyed Steels
In this work the effects of controlled rolling parameters and adding of Niobium have been studied. In this order two steel grades with and without Niobium are planed and after steelmaking and continuous casting, rolling process are done. Then, laboratory investigations such as microstructure, mechanical properties and grain size analysis were performed Tensile and Charpy impact tests specimens ...
متن کاملParticle-Size-Grouping Model of Precipitation Kinetics in Microalloyed Steels
The formation, growth, and size distribution of precipitates greatly affects the microstructure and properties of microalloyed steels. The computational Particle-Size-Grouping (PSG) kinetic models were developed to simulate precipitate particle growth due to collision and diffusion mechanisms. Firstly, the standard PSG method for collision is clearly explained and verified. Then a new PSG metho...
متن کاملCharpy Notch Toughness and Hardness of Reheated Martensite and Lower Bainite
The resistance to hydrogen embrittlement is of essential importance for steels for vessels for storage of hydrocarbons and depends on the effect of absorbed hydrogen on steel ductility. API tests have shown for the 490 MPa yield stress HSLA steels with the microstructure of ferrite and cementite particles a much greater reduction of area than for the 350 MPa steel with the microstructure of pol...
متن کاملEffect of Different Current Values on Microstructure and Mechanical Properties of Microalloyed Steels Joined by the Submerged Arc Welding Method
In this study, microalloyed steels were joined by using the submerged arc welding method at different welding currents of 350 A, 400 A and 450 A. The effects of selected welding parameters on the microstructure and mechanical properties of welded materials were investigated. Tensile tests and microhardness measurements were performed. Microstructural changes have been identified in the welding ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Microscopy and Microanalysis
سال: 2002
ISSN: 1431-9276,1435-8115
DOI: 10.1017/s1431927602104697