TEMPERATURE DEPENDENCY OF FRACTURE TOUGHNESS OF HIGH-STRENGTH FERRITIC STEEL HARDOX-400
نویسندگان
چکیده
منابع مشابه
Dynamic Fracture Toughness versus Crack Tip Speed Relationship at Lower than Room Temperature for High Strength 3239var Structural Steel
A transient _nite element analysis is carried out to provide insight into the low temperature dynamic material toughness versus crack tip relationship for high strength structural steels under intense stress pulse loading[ The problem analyzed here is plane strain fracture of an edge cracked specimen under plane wave loading conditions[ The _nite element formulation employed accounts for the e}...
متن کاملParametric Investigation of CO2 Laser Cutting of Mild Steel and Hardox-400 Material
Laser cutting is widely used thermal energy based non-contact type, nonconvectional machining process. In the present research, the effect of laser machine processing parameters such as laser power, gas pressure, cutting speed and thickness effect on measured response such as surface roughness. The experiment was designed according to Taguchi L27 orthogonal array with three different level of e...
متن کاملStrength and Toughness of Reinforced Concrete with Coated Steel Fibers
The effect of zinc phosphate (ZP) and zinc calcium phosphate (ZCP) coatings on the reinforcing mechanisms of smooth steel fiber in cementitious matrix have been studied. The results of pull out tests illustrated that by coating smooth steel fiber the pull-out load may be increased up to 100%. The effect of zinc phosphate coating on interface bonding was more than zinc-calcium phosphate coating....
متن کاملEffect of strain rate and temperature on mechanical properties and fracture mode of high strength precipitation hardened ferritic steels
The effect of strain rate on the flow stress of a low carbon high strength ferritic steel that contains nanometer size Cu–Ni–Al precipitates is found to be much less than that of HSLA 65 that does not have such precipitates. This result is in agreement with the theory that such precipitates locally lower the Peierls stress for screw dislocations in body-centered cubic iron. The fracture mode in...
متن کاملInfluence of Texture on Impact Toughness of Ferritic Fe-20Cr-5Al Oxide Dispersion Strengthened Steel
Fe-based oxide dispersion strengthened (ODS) steels are oriented to applications where high operating temperatures and good corrosion resistance is paramount. However, their use is compromised by their fracture toughness, which is lower than other competing ferritic-martenstic steels. In addition, the route required in manufacturing these alloys generates texture in the material, which induces ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Mechanica et Automatica
سال: 2013
ISSN: 2300-5319
DOI: 10.2478/ama-2013-0037