Temperature-dependent absorption assessment of YAG ceramics as cladding material

Effect of Si-induced defects on 1μm absorption losses in laser-grade YAG ceramics

THERMAL FRACTURE OF CERAMICS WITH TEMPERATURE-DEPENDENT PROPERnES

Some aspects of thetmal fracture mechanics of ceramics with temperature-dependent properties are studied. It is first shown that the square-root singular field still prevaiLY in the crack tip region. However, the size of the K-dominant zone may be influenced by the effect of temperature-dependent properties. Then the steady thetmal stress intensity factor in an edge-cracked strip is calculated....

Thermomechanical Buckling of Simply Supported Shallow FGM Spherical Shells with Temperature dependent Material

The thermomechanical buckling of simply supported thin shallow spherical shells made of functionally graded material is presented in this paper. A metal-ceramic functionally graded shell with a power law distribution for volume fraction is considered, where its properties vary gradually through the shell thickness direction from pure metal on the inner surface to pure ceramic on the outer surfa...

Cavitation Damage During Flexural Creep of SiAlON–YAG Ceramics

Cavitation damage in flexure bars crept at 1170°C was studied by a density measurement technique. The cavity density within the flexure beams could be approximated by a linear function of position from the tensile surface. A threshold stress for cavitation damage is suggested from the results of this study. Below the threshold tensile stress, cavitation ceases, whereas above the threshold, cavi...

Stress Redistribution Analysis of Piezomagnetic Rotating Thick-Walled Cylinder with Temperature-and Moisture-Dependent Material Properties

In this article, the problem of time-dependent stress redistribution of a piezomagnetic rotating thick-walled cylinder under an axisymmetric hygro-thermo-magneto-electro-mechanical loading is analyzed analytically for the condition of plane strain. Using the constitutive equations, a differential equation is found in which there are creep strains. Primarily, eliminating creep strains, an analyt...