Temperature dependent strengthening contributions in austenitic and ferritic ODS steels
نویسندگان
چکیده
منابع مشابه
High heat flux testing of 12–14Cr ODS ferritic steels
0022-3115/$ see front matter 2009 Published by doi:10.1016/j.jnucmat.2009.09.022 * Corresponding author. E-mail address: [email protected] (Z. Oksiut The thermal performance of Fe–(12–14)Cr–2W–0.3Ti–0.3Y2O3 ODS reduced activation ferritic steels, which are considered as candidate first wall materials for the future fusion power reactors and were manufactured by mechanical alloying in hydr...
متن کاملDislocation Strengthening without Ductility Trade-off in Metastable Austenitic Steels
Strength and ductility are mutually exclusive if they are manifested as consequence of the coupling between strengthening and toughening mechanisms. One notable example is dislocation strengthening in metals, which invariably leads to reduced ductility. However, this trend is averted in metastable austenitic steels. A one-step thermal mechanical treatment (TMT), i.e. hot rolling, can effectivel...
متن کاملLow-Temperature Carburization of Austenitic Stainless Steels
LOW-TEMPERATURE CARBURIZATION is a gaseous carburization process performed at atmospheric pressure, at temperatures where the kinetics of substitutional diffusion are very slow. Low-temperature carburization hardens the surface of austenitic stainless steels through the diffusion of interstitial carbon, without the formation of carbides. The surface must be activated, by modification and remova...
متن کاملThe High Temperature Tensile Properties of Ferritic-martensitic and Austenitic Steels after Irradiation in an 800 Mev Proton Beam
This study examines the effect of tensile test temperatures ranging from 50°C to 600°C on the tensile properties of a modified 9Cr-1Mo ferritic steel (T91) and a 316L stainless steel (SS) after high energy proton irradiation at about 35°C-67°C. After 1-3 dpa, the proton-irradiated T91 steel was tensile tested at temperatures from 50°C to 600°C. It was observed that the yield strength and ultima...
متن کاملDynamic tensile tests on ferritic and austenitic steels with improved testing and measuring technique
For analysing dynamically loaded structures by means of the finite element method a dynamic constitutive material model is necessary to obtain reliable results. For this purpose dynamic tensile tests were performed with the fine grained steel 20MnMoNi 5 5 (A508 CI. 3) and the austenitic steel X6CrNi 18 11'at different velocities. Smooth round bar specimens of different geometries were used. Dis...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science and Engineering: A
سال: 2020
ISSN: 0921-5093
DOI: 10.1016/j.msea.2020.139452