Temperature-insensitive refractometer based on an RI-modulated singlemode-multimode-singlemode fibre structure

Strain and temperature sensitivity of a singlemode polymer optical fibre

We report experimental measurements of the strain and temperature sensitivity of the optical phase in a singlemode polymer optical fibre. These values were obtained by measuring optical path length change using a Mach-Zender interferometer.

Magnetic Field Sensing Based on Magnetic-Fluid-Clad Multimode-Singlemode-Multimode Fiber Structures

Magnetic field sensing based on magnetic-fluid-clad multimode-singlemode- multimode fiber structures is proposed and experimentalized. The structures are fabricated out using fiber fusion splicing techniques. The sensing principle is based on the interference between the core mode and cladding modes. Two interference dips are observed in our spectral range. Experimental results indicate that th...

Low Frequency Noise Characteristics of Multimode and Singlemode Laser Diodes

Fiber refractometer based on a fiber Bragg grating and single-mode-multimode-single-mode fiber structure.

A refractive index (RI) sensor based on a novel fiber structure that consists of a single-mode-multimode-single-mode (SMS) fiber structure followed by a fiber Bragg grating was demonstrated. The multimode fiber in the SMS structure excites cladding modes within output single-mode fiber (SMF) and recouple the reflected cladding Bragg wavelength to the input SMF core. By measuring the relative Br...

Polarisation Dependence of Bend Loss for a Standard Singlemode Fiber

Polarization dependence of bend loss caused by the polymer coating layer for a standard singlemode fiber (SMF28) is investigated theoretically and experimentally. Bend loss for SMF28 for both the TE and TM mode is calculated separately. Normalized polarization dependent loss is proposed for the characterization of the polarization sensitivity of bend loss for different bend radii. Corresponding...