Temporal optical besselon waves for high-repetition rate picosecond sources
نویسندگان
چکیده
We analyse the temporal properties of optical pulse wave that is obtained by applying a discrete set spectral π/2 phase shifts to continuous-wave light phase-modulated sinusoidal wave. develop an analytical model describe this new waveform we name ‘besselon’. also discuss reduction sidelobes in intensity profiles means additional π shift, and show resulting pulses can be efficiently time-interleaved. The various predicted besselon are confirmed experiments demonstrating generation low duty cycle, high-quality at repetition rates up 28 GHz.
منابع مشابه
Optical Fiber Pumped High Repetition Rate and High Power Nd:YVO4 Picosecond Regenerative Amplifier
We report a stable optical fiber pumped Nd:YVO4 all solid state regenerative amplifier with all fiber picosecond laser as seed source. 888 nm Yb optical fiber lasers was chosen as pump source to reduce quantum defect for improved thermal performance. At the repetition rate of 99.6 kHz, maximum power of 19.63 W with 36 ps pulse duration were achieved when seeded by a 150 mW picosecond oscillator...
متن کاملYb-fiber-laser-pumped, high-repetition-rate picosecond optical parametric oscillator tunable in the ultraviolet.
We report a compact tunable 240-MHz picosecond source for the ultraviolet based on intra-cavity frequency doubling of a signal-resonant MgO:sPPLT optical parametric oscillator (OPO), synchronously pumped at 532 nm in the green by the second harmonic of a mode-locked Yb-fiber laser at 80-MHz repetition rate. By deploying a 30-mm-long multi-grating MgO:sPPLT crystal for the OPO and a 5-mm-long Bi...
متن کاملHigh-power, variable repetition rate, picosecond optical parametric oscillator pumped by an amplified gain-switched diode.
We demonstrate a picosecond optical parametric oscillator (OPO) that is synchronously pumped by a fiber-amplified gain-switched laser diode. At 24W of pump power, up to 7.3W at 1.54microm and 3.1W at 3.4microm is obtained in separate output beams. The periodically poled MgO-doped LiNbO(3) OPO operates with ~17ps pulses at a fundamental repetition rate of 114.8MHz but can be switched to higher r...
متن کاملEfficient versatile-repetition-rate picosecond source for material processing applications.
We report on the development of an efficient and simple picosecond diode-pumped solid-state laser source with a versatile repetition rate (typically 1 Hz-1 MHz) for material processing applications. The laser source is based on a 4 MHz repetition rate mode-locked oscillator and a passive 3D multipass amplifier both based on Nd:YVO(4) crystals. Micromachining experiments were performed to study ...
متن کامل1.9 picosecond high-sensitivity sampling optical temporal analyzer
The rapid development of ultrafast sciences places an increasing demand on high-speed, high-dynamic range measurement techniques. An optical correlation technique based on photoconductivity for measuring ultrafast laser pulses was first demonstrated by Austin et aL1 However, due to relatively low efficiency of.both signal detection and sampling, such a system was not able to measure weak optica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JPhys photonics
سال: 2021
ISSN: ['2515-7647']
DOI: https://doi.org/10.1088/2515-7647/abdd80