Temporal sequence of deformation twinning in CoCrNi under tribological load

Deformation twinning in nanocrystalline materials

Nanocrystalline (nc) materials can be defined as solids with grain sizes in the range of 1–100 nm. Contrary to coarse-grained metals, which become more difficult to twin with decreasing grain size, nanocrystalline face-centered-cubic (fcc) metals become easier to twin with decreasing grain size, reaching a maximum twinning probability, and then become more difficult to twin when the grain size ...

Deformation twinning in nanocrystalline aluminum.

We report transmission electron microscope observations that provide evidence of deformation twinning in plastically deformed nanocrystalline aluminum. The presence of these twins is directly related to the nanocrystalline structure, because they are not observed in coarse-grained pure aluminum. We propose a dislocation-based model to explain the preference for deformation twins and stacking fa...

Acoustic Emission of Deformation Twinning in Magnesium

The Acoustic Emission of deformation twinning in Magnesium is investigated in this article. Single crystal testing with combined full field deformation measurements, as well as polycrystalline testing inside the scanning electron microscope with simultaneous monitoring of texture evolution and twin nucleation were compared to testing at the laboratory scale with respect to recordings of Acousti...

Load partitioning and evidence of deformation twinning in dual-phase fine-grained Zr–2.5%Nb alloy

Shear-Induced Homogeneous Deformation Twinning in FCC

The {111}<11 2 > shear stress-displacement behavior for face-centered cubic (fcc) metals, aluminum and copper, is calculated using empirical potentials proposed by Mishin and by Ercolessi, based on the embedded atom method (EAM), and compared with published ab initio calculations. In copper close agreement is observed in the results given by the Mishin potential for both the ideal shear strengt...