Tentative Characterization of Old Structural Concrete through Mechanical Fracture Parameters
نویسندگان
چکیده
منابع مشابه
Upscaling Cement Paste Microstructure to Obtain the Fracture, Shear, and Elastic Concrete Mechanical LDPM Parameters
Modeling the complex behavior of concrete for a specific mixture is a challenging task, as it requires bridging the cement scale and the concrete scale. We describe a multiscale analysis procedure for the modeling of concrete structures, in which material properties at the macro scale are evaluated based on lower scales. Concrete may be viewed over a range of scale sizes, from the atomic scale ...
متن کاملA Simple Fracture Mechanical Interpretation of Size Effects in Concrete Fracture Toughness Tests
Concrete is a so called quasibrittle material which, despite predominantly elastic material response, exhibits in tension loading a stable non-linear fracture response, when tested under displacement control. The reason for the non-linearity is the development of a fracture process zone, in front of the crack, due to micro-cracking and crack bridging. The effect of the fracture process zone is ...
متن کاملFracture characterization of concrete/epoxy interface affected by moisture
0167-6636/$ see front matter 2010 Elsevier Ltd doi:10.1016/j.mechmat.2010.09.001 ⇑ Corresponding author. Tel.: +1 617 253 7186; fa E-mail addresses: [email protected] (D. Lau (O. Büyüköztürk). Knowledge on durability of concrete/epoxy bonded systems is becoming essential as the use of these systems in applications such as fiber-reinforced polymer (FRP) in strengthening of concrete structures is be...
متن کاملMeasurement and characterization of mixed mode fracture in concrete
The Mixed Mode fracture behavior of concrete is measured and characterized by investigating a single crack in a double-notched specimen. To obtain the characterization a very stiff biaxial test set-up with a closed loop control is constructed. The opening and sliding components of the Mixed Mode displacement are measured using a specially designed orthogonal gauge, and the measurements are used...
متن کاملCharacterization of Thermo-Mechanical and Fracture Behaviors of Thermoplastic Polymers
In this paper the effects of the strain rate on the inelastic behavior and the self-heating under load conditions are presented for polymeric materials, such as polymethyl methacrylate (PMMA), polycarbonate (PC), and polyamide (PA66). By a torsion test, it was established that the shear yield stress behavior of PMMA, PC, and PA66 is well-described by the Ree-Eyring theory in the range of the co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Engineering
سال: 2017
ISSN: 1877-7058
DOI: 10.1016/j.proeng.2017.05.357