Textural and Microstructural Evolution during Cold-Rolling of Pure Nickel
نویسندگان
چکیده
منابع مشابه
Microstructural Modeling During Multi-Pass Rolling of a Nickel-Base Superalloy
Superalloys are metallic alloys used for high temperature applications such as encountered in the aircraft industry and where resistance to deformation is a primary requirement. Alloy 718 and waspaloy are few examples of Nickel-base superalloys that resist deformation at elevated temperatures and are therefore difficult to hot work. The major hotworking operations are forging, extrusion, and ro...
متن کاملMicrostructural Evolution of X45CrNiW189 Valve Steel During Hot Deformation
The hot compression tests were carried on X45CrNiW189 valve steel (X45) in the temperature range of 1000– 1200 °C and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperature softening behavior of this steel. For the exact prediction of flow stress, the effective stress-effective strain curves were obtained from experiments under various conditions. On the basis of experi...
متن کاملStructural and Textural Evolution during Cold Work in Ti-Rich Ni-Ti Shape Memory Alloy
The properties and cost have made the Nickel-Titanium (NiTi) shape memory alloys (SMA) attractive for a variety of applications wherein shape memory effect (SME) / superelasticity (SE) and biocompatibility are important. Anisotropy of the shape recovery associated with shape memory effect strongly depends on the type of r 30 minutes in air) Ti-Rich Ni-Ti SMA (Ni51at%Ti) when subjected to cold r...
متن کاملMicrostructural evolution during film growth
Atomic-scale control and manipulation of the microstructure of polycrystalline thin films during kinetically limited low-temperature deposition, crucial for a broad range of industrial applications, has been a leading goal of materials science during the past decades. Here, we review the present understanding of film growth processes—nucleation, coalescence, competitive grain growth, and recrys...
متن کاملmicrostructural evolution of x45crniw189 valve steel during hot deformation
the hot compression tests were carried on x45crniw189 valve steel (x45) in the temperature rangeof 1000– 1200 °c and the strain rate range of 0.004 – 0.5 s-1 in order to study the high temperaturesoftening behavior of this steel. for the exact prediction of flow stress, the effective stress-effectivestrain curves were obtained from experiments under various conditions. on the basis of experimen...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Science Forum
سال: 1994
ISSN: 1662-9752
DOI: 10.4028/www.scientific.net/msf.157-162.693