Textures of Cold-Rolled Copper and Silver
نویسندگان
چکیده
منابع مشابه
Textures and Local Textures in Severely Cold - Rolled and Annealed Ultra - Fine - Grained FeCo Alloy
We find that a severely rolled FeCo alloy has anomalous enhancement of the rotated-cube {100}<011> texture component and a decrease of the {111} components after annealing, which is contrast to the recrystallization behaviors reported in traditional BCC metals and alloys. The local texture measurements show that two kinds of grains with obviously different orientations, i.e. {100} and {111}, ar...
متن کاملKinetics of individual grains during recrystallization of cold-rolled copper
The formation of a recrystallization texture is closely related to the nucleation and growth of recrystallizing grains, which may vary from grain to grain. Cube texture is a commonly observed recrystallization texture in face centered cubic metals of medium to high stacking fault energy after heavy cold-rolling and annealing. In this work, recrystallization of pure copper cold-rolled to a von M...
متن کاملFatigue and Anisotropic behaviours of cold rolled AA1200 Aluminium Alloy
This study examines the fatigue and anisotropy behaviour of cold rolled AA1200 aluminium alloy for light weight automotive connecting rod application. Aluminium (Al) 1200 ingots were melted at temperature of 680 0C (after one hour of heating) cast in sand mould and cast samples homogenized for 6 hrs at 480 0C. The cold rolling process was carried out after homogenisation for 10, 20, 30, 40 and ...
متن کاملComparison of the thermal stability between electro-deposited and cold-rolled nanocrystalline copper samples
The objective of this work is to investigate the microstrain effect on grain growth and strain release processes in nanocrystalline (nc) samples. Two kinds of nc Cu samples were studied by using differential scanning calorimetry (DSC), X-ray diffraction (XRD) and transmission electron microscopy (TEM): an electro-deposited nc Cu sample with an average grain size of about 30 nm and one after col...
متن کاملVanadium in Cold-rolled Sheet Steels
In hot rolled products, which are the subject of other presentations here, vanadium has been used for many years in high strength products, often in combination with other microalloying additions such as niobium or titanium. Vanadium can provide important contributions via both precipitation strengthening and ferrite grain refinement (due to austenite conditioning during thermomechanical proces...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1957
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.21.8_512