Textures of Sheet in AA3003 Aluminum Alloy Under Biaxial Stretching
نویسندگان
چکیده
منابع مشابه
Evolution of Strain-Induced Microstructure and Texture in Commercial Aluminum Sheet under Balanced Biaxial Stretching
The evolution of surface topography and crystallographic texture was investigated under balanced biaxial stretching in sheets of the aluminum alloy 5052-H32. Two different lots of material, with an initial nominal thickness of 1 mm, were tested in the as-received condition. Samples with increasing levels of balanced biaxial strain were deformed using a modified Marciniak in-plane stretching tes...
متن کاملTexture Evolution in Continuous Casting AA5052 Aluminum Alloy Hot Band During Equi-Biaxial Stretching
In this study, the global texture evolution in a 2 mm gauge hot band of continuous casting AA5052 aluminum alloy, annealed at 449 °C for 4 hours, was investigated. Samples were deformed to three different strain values under a near equi-biaxial stretching condition. Their textures were. The major and minor strains of these samples were measured using an automatic strain analysis system. The tex...
متن کاملPrediction of earing in deep drawing of anisotropic aluminum alloy sheet using BBC2003 yield criterion
This paper investigates the earing phenomenon in deep drawing of AA3105 aluminum alloy, experimentally and numerically. Earing defect is mainly attributed to the plastic anisotropy of sheet metal. In order to control such defect, predicting the evolution of ears in sheet metal forming analyses becomes indispensable. In this regard, the present study implements the advanced yield criterion BBC20...
متن کاملCrack Behavior of the Aluminum Alloy 2024 Under Fretting Conditions
The initial stage of fretting fatigue crack growth is significantly influenced by tangential force induced by fretting action along the contact surface where a mixed-mode crack growth is involved. Fretting crack behavior of aluminum alloy 2024 was studied, taking into account the problem of contact asperities. Finite element was used for the determination of the stress field near the contact su...
متن کاملThe Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet
The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Textures and Microstructures
سال: 2000
ISSN: 0730-3300,1029-4961
DOI: 10.1155/tsm.34.217