The Acoustic Emission Parameters Obtained during Three-point Bending Test on Thermal-stressed Concrete Specimens

Acoustic Emission and Modal Frequency Variation in Concrete Specimens under Four-Point Bending

The Acoustic Emission (AE) and Dynamic Identification (DI) techniques were applied simultaneously, in an original way, to examine the stress dependent damage progress in pre-notched concrete beams tested in four-point bending. The damage mechanisms were characterized by analyzing the AE signals registered during the tests, conducted by increasing the specimen’s vertical deflection. In particula...

Cluster Analysis of Acoustic Emission Signals for Carbon/Epoxy Composite in Four-point Bending Test (RESEARCH NOTE)

Due to the extensive use of composites in various industries and the fact that defects reduce ultimate strength and efficiency during operation, detection of failures in composite parts is very important. The aim of this paper is to use Acoustic Emission (AE) non-destructive method in four-point bending test of carbon/epoxy composite to analyze and examine the failure mechanisms. This method is...

Acoustic Emission during Stress Corrosion Cracking Test

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...

Part A- Experimental: Experimental Analysis of Crack Propagation in Pre-stressed Concrete Sleepers by Fracture Mechanics

This study investigates propagation of mode I crack in B70 pre-stressed concrete sleepers by fracture mechanics approach. A new experimental analysis is done for notched B70 pre-stressed concrete sleepers with Replica test and image analysis. A scanning electron microscope test (SEM) and an image analysis are applied for the Replica test in order to determine crack length and crack mouth openin...

Damage Detection of Carbon Fiber-reinforced Concrete Under Bending Test