The adsorption of nitrogen monoxide on iron-treated activated carbon fibers.
نویسندگان
چکیده
منابع مشابه
Enhanced CO2 Adsorption on Activated Carbon Fibers Grafted with Nitrogen-Doped Carbon Nanotubes
In this paper, multiscale composites formed by grafting N-doped carbon nanotubes (CNs) on the surface of polyamide (PAN)-based activated carbon fibers (ACFs) were investigated and their adsorption performance for CO₂ was determined. The spaghetti-like and randomly oriented CNs were homogeneously grown onto ACFs. The pre-immersion of cobalt(II) ions for ACFs made the CNs grow above with a large ...
متن کاملPhenol Removal from Aqueous Solutions by Adsorption on Activated Carbon of Miswak’s Root Treated with KMnO4
Background and Purpose: Phenol and derivatives are common pollutants of drinking water which are blamed for crucial adverse effects such as poisoning, cancer, and malformation. In this study, an activated carbon of Miswak’s root (MR) was used for the removal of phenol from aqueous solutions as a low-cost and high surface adsorbent. Materials and Methods: Adsorption exper...
متن کاملWater Vapor Adsorption on Chemically Treated Activated Carbon Cloths
Water vapor adsorption on activated carbon cloth (ACCBO) which has been oxidized to a level of 32% oxygen exhibits a unique isotherm with uniform hysteresis of small magnitude upon desorption. In contrast the adsorption on untreated ACCBO and chemically modified ACCBO (7.8% Cl), ACCBO (16% Cl), and ACCBO (4% N), exhibits sigmoidal isotherms with hysteresis loops of varying magnitudes. The latte...
متن کاملMesoporous Activated Carbon Fibers from Lignocelullosic Materials: Adsorption Studies
High surface area and highly mesoporous activated carbon fibers (ACF) were obtained by physical activation of natural precursors (vetiver roots and bagasse) with steam and chemical activation using phosphoric acid. The textural characteristics of the activated were determined by nitrogen adsorption study and mercury porosimetry and showed that interesting porosity were obtained (SBET up to 1600...
متن کاملSelective catalytic reduction of sulfur dioxide by carbon monoxide over iron oxide supported on activated carbon
The selective reduction of sulfur dioxide with carbon monoxide to elemental sulfur was studied over ACsupported transition-metal oxide catalysts. According to the study, Fe2O3 /AC was the most active catalyst among the 4 AC-supported catalysts tested. By using Fe2O3 /AC, the best catalyst, when the feed conditions were properly optimized (CO/SO2 molar ratio = 2:1; sulfidation temperature, 400 ◦...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 1985
ISSN: 2185-0925,0369-4577
DOI: 10.1246/nikkashi.1985.1351