The CERN laser–ion source
نویسندگان
چکیده
منابع مشابه
Cern Ps Laser Ion Source Development
CERN, together with ITEP and TRINITI (Russia), is developing a CO2 laser ion source. The key design parameters are: 1.4×10 ions of Pb in a pulse of 5.5 μs, with a 4-rms emittance of 0.2×10 rad m, working at a repetition rate of 1 Hz. This device is considered as one candidate source for LHC heavy ion operation. The status of the laser development, the experimental set-up of the source consistin...
متن کاملStatus of the CO2 Laser Ion Source at CERN
A laser ion source using a CO2 laser focused onto a solid target is under study at CERN for the production of high currents of highly-charged heavy ions, for possible use in the pre-injector for LHC. A new expansion and extraction layout was installed in this test facility, improving the alignment and making the target to extraction distance more flexible. A two solenoid beam transport system w...
متن کاملPulsed ECR Source in Afterglow Operation at CERN
A pulsed 14 GHz ECR4 source, adapted to operate in the afterglow mode, was delivered by GANIL to CERN in the framework of the Heavy Ion Facility Project. After four months of operation to commission the facility, it completed its first operational run of nine weeks at the end of 1994, providing lead ions to nuclear physics and ion cooling experiments. A very stable beam, with a useful length of...
متن کاملUsing a Fiber Optic CAN Bus for the Proton Source Control of the CERN PS-Linac
Following the recommendations for the use of field buses at CERN, the CAN (Controller Area Network) bus has been chosen to control and acquire the necessary parameters of the proton source of the LINAC II. This project represents two novel aspects, one on the hardware and one on the software side: since the source is on a high electrical potential (92 kV), a fiber-optic interface has been devel...
متن کاملCommissioning of the First Klystron-based X-band Power Source at Cern
A new klystron based X-band rf power source operating at 11.994 GHz has been installed and started to be commissioned at CERN in collaboration with CEA Saclay and SLAC for CLIC accelerating structure tests. The system comprises a solid state high voltage modulator, an XL5 klystron developed by SLAC, a cavity based SLED type pulse compressor, the necessary low level rf system including rf diagno...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Laser and Particle Beams
سال: 1996
ISSN: 0263-0346,1469-803X
DOI: 10.1017/s0263034600010041