The damage analysis of the reinforced concrete beam and the prestressed reinforced concrete beam
نویسندگان
چکیده
منابع مشابه
Seismic Behavior of Steel Reinforced Concrete Beam-Columns and Frames
The ability to perform accurate nonlinear simulations is a key component in the assessment of the behavior of seismic force resisting systems. A three-dimensional distributed plasticity formulation for composite beam-columns suitable for nonlinear static and dynamic analyses of composite seismic force resisting systems has been developed. New uniaxial constitutive relations are developed for th...
متن کاملDuctility of Prestressed and Partially Prestressed Concrete Beam Sections
D analyses of structures responding elastically to ground motions recorded during severe earthquakes have shown that the theoretical response inertia loads are generally significantly greater than the static design lateral loads recommended by codes. Hence, structures designed for the lateral earthquake loads recommended by codes can only survive severe earthquakes if they have sufficient ducti...
متن کاملExperimental and Analytical Study on Reinforced Concrete Deep Beam
ABSTRACT: Several reinforced concrete deep beams with different L/D ratios (1.5, 1.6, 1.71) were cast and tested in order to investigate the strain distribution pattern at mid-section of the beam. This paper describes analysis of deep beams subjected to two point loading with three different L/D ratios (1.5, 1.6, 1.71) using Non-linear Finite element method (ANSYS 9.0 software). In ANSYS 9.0 so...
متن کاملTapered Polymer Fiber Sensors for Reinforced Concrete Beam Vibration Detection
In this study, tapered polymer fiber sensors (TPFSs) have been employed to detect the vibration of a reinforced concrete beam (RC beam). The sensing principle was based on transmission modes theory. The natural frequency of an RC beam was theoretically analyzed. Experiments were carried out with sensors mounted on the surface or embedded in the RC beam. Vibration detection results agreed well w...
متن کاملInfluence of changes in the prestress force on dynamic specifications of the prestressed concrete beam
Pre-stress techniques tend to increase cross-sectional capacity and optimize design. Such features have made these techniques rather popular. Over time, these structures tend to fail, and the reduction of pre-stress force over the lifetime of the structure is said to be one of the most significant destructive factors in these structures. This decrease in force occurs due to various reasons. In ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: MATEC Web of Conferences
سال: 2018
ISSN: 2261-236X
DOI: 10.1051/matecconf/201815702055