The Design and Performance of a 150-MW Klystron at S Band
نویسندگان
چکیده
منابع مشابه
The Design and Performance of 150-MW S-Band Wystrons
As part of an international collaboration, the Stanford Linear Accelerator Center (SLAC) klystron group has designed, fabricated and tested a 60 Hz, 3 W, 150 MW klystron built for Deutsches Elektronen Synchrotron (DESY). A test diode with a 535 kV, 700 A electron beam was constructed to verify the gun operation. The first klystron was built and successfully met design specifications. This paper...
متن کامل150-MW S-Band Klystron Program at the Stanford Linear Accelerator Center
Two S-Band klystrons operating at 150 MW have been designed, fabricated and tested at the Stanford Linear Accelerator Center (SLAC) during the past two years for use in an experimental accelerator at Deutsches Elektronen Synchrotron (DESY) in Hamburg Germany. Both klystrons operate at the design power, 60 Hz repetition rate, 3 ps pulsewidth, with an efficiency > 40%, and agreement between the e...
متن کاملThe X-band Klystron Program at Slac*
The X-band rf source development at SLAC can be considered a qualified success. A total of twelve klystrons were built. Six of them are still in use. The latest tube, XL4, produced 75 MW at an efficiency of 47.5 percent. However, victory cannot be declared as yet, since an NLC prototype has not been fully designed and the decision between permanent magnet focusing and a super-conducting solenoi...
متن کاملX-band Klystron Development at Slac
The development of X-band klystrons at SLAC originated with the idea of building an X-band Linear Collider in the late 1980’s. Since then much effort has been expended in developing a reliable X-band Power source capable of delivering >50 MW RF power in pulse widths >1.5 μs. I will report on some of the technical issues and design strategies which have led to the current SLAC klystron designs.
متن کاملa study on the design of bio-ethanol process from date wastes of sistan and baluchistan province
اتانول کاربردهای متنوعی در صنایع لاستیک سازی، رنگسازی، حلالها ومکمل سوخت خودرو دارد. اتانول برخلاف نفت از جمله مواد تجدیدپذیر محسوب می شود که مشکلات زیست محیطی و آلودگی نیز ایجاد نمی کند. استفاده از اتانول به عنوان مکمل سوختخودروها از جمله مهمترین مصارف صنعتی این ماده بشمار می رود. با توجه به این موضوع تحقیق و توسعه در زمینه تولید اتانول با درجه خلوص بالا در سطح جهان، و نه تنها در کشور های پیشر...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IEEE Transactions on Plasma Science
سال: 1985
ISSN: 0093-3813,1939-9375
DOI: 10.1109/tps.1985.4316471