The Development of Arc Stud Welding
نویسندگان
چکیده
منابع مشابه
On Line Monitoring for Defects in Electric Arc Stud Welding
ABSTRACT The application of on-line monitoring system for recording main welding parameters during electric arc stud welding process at different electric arc stability changes is described in this paper. In the first part of the paper, the basics of electric arc stud welding process, and equipment for stud welding and process monitoring used in experimental part is described. In the second par...
متن کاملInfluence of the Activating Flux on Weld Joint Properties at Arc Stud Welding Process
The first papers on the activating flux application appeared already in 1950’s and 1960’s, but the interest for this welding process has been activated again in the last ten years 1, 2 . In order to increase the efficiency and productivity of TIG process, a variant of process with the activating flux is applied (ATIG). With the presence of the activating flux and high temperature, the value of ...
متن کاملReduction of Biomechanical and Welding Fume Exposures in Stud Welding.
The welding of shear stud connectors to structural steel in construction requires a prolonged stooped posture that exposes ironworkers to biomechanical and welding fume hazards. In this study, biomechanical and welding fume exposures during stud welding using conventional methods were compared to exposures associated with use of a prototype system that allowed participants to weld from an uprig...
متن کاملTaguchi Experimental Design and Artificial Neural Network Solution of Stud Arc Welding Process
Stud arc welding has become one of the most important unit operations in the mechanical industries. The need to reduce the time from product discovery to market introduction is inevitable. Reducing of standard deviation of tensile strength with desirable tensile strength joint as a performance character was use to illustrate the design procedure. The effects of (welding time, welding current, s...
متن کاملGas tungsten arc welding
Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding, is an arc welding process that uses a nonconsumable tungsten electrode to produce the weld. The weld area is protected from atmospheric contamination by a shielding gas (usually an inert gas such as argon), and a filler metal is normally used, though some welds, known as autogenous welds, do not require it. A const...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Biuletyn Instytutu Spawalnictwa
سال: 2019
ISSN: 0867-583X,2300-1674
DOI: 10.17729/ebis.2019.4/3