The dynamic stress intensity factor analysis of adhesively bonded material interface crack with damage under shear loading
نویسندگان
چکیده
منابع مشابه
Crack Path Selection in Adhesively Bonded Joints: the Role of Material Properties
This paper investigates the role of material properties on crack path selection in adhesively bonded joints. First, a parametric study of directionally unstable crack propagation in adhesively bonded double cantilever beam specimens (DCB) is presented. The alternating crack trajectories in specimens of various material systems are simulated using the finite element method and the results indica...
متن کاملThreshold stress intensity factor and crack growth rate prediction under mixed-mode loading
A new mixed-mode threshold stress intensity factor is developed using a critical plane-based multiaxial fatigue theory and the Kitagawa diagram. The proposed method is a nominal approach since the fatigue damage is evaluated using remote stresses acting on a cracked component rather than stresses near the crack tip. An equivalent stress intensity factor defined on the critical plane is proposed...
متن کاملStress Analysis at a Bi-Material Interface Crack-tip
The optical methods of Caustics, Photoelasticity and Isopachics for the evaluation of the stress intensity factors and the distribution of the principal stresses at a bi-material interface crack-tip, were proposed. The caustics, isochromatic and isopachic fringes are developed from the stress field which results from a stress function X(r, ). When the crack-tip, which is perpendicular to interf...
متن کاملExperimental and Numerical Investigation of the Performance of Automotive Adhesively Bonded Crash Box Beams Under Transverse Loading
The aim of the study was to examine the deformation modes and also degradation of an adhesively bonded rectangular cross section beam used in the automotive body structure. The study included: (1) performing new experimental investigations on the three-point bend behavior of a rectangular cross section beam made by adhesive bonding method. (2) developing a finite element (FE) model to predict t...
متن کاملContact Problem for Bonded Nonhomogeneous Materials under Shear Loading
The present paper examines the contact problem related to shear punch through a rigid strip bonded to a nonhomogeneous medium. The nonhomogeneous medium is bonded to another nonhomogeneous medium. The strip is perpendicular to the y-axis and parallel to the x-axis. It is assumed that there is perfect bonding at the common plane surface of two nonhomogeneousmedia. Using Fourier cosine transforms...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Applied Mathematics and Mechanics
سال: 2008
ISSN: 0253-4827,1573-2754
DOI: 10.1007/s10483-008-1112-z