The Effect of Mean Stress and Strain on Crack Growth and Crack Closure in Low-Cycle Fatigue
نویسندگان
چکیده
منابع مشابه
On Crack Closure and Crack Tip Shielding during Fatigue Crack Growth
Fatigue crack growth can be strongly influenced by crack closure, i. e., the contacting of the opposing faces of a fatigue crack above the minimum load in a loading cycle. This crack closure shields the crack tip from the full stress field, but different views are held regarding the extent of this shielding. The type of closure, whether it be plasticity-induced, or roughness-induced may also pl...
متن کاملEffect of Mean Stress on Fatigue Crack Growth Behavior of Stainless Steel 304L
Stainless steel has been employed in many engineering applications ranging from pharmaceutical equipment to piping in the nuclear reactors and storage to chemical products. In this attempt, simulation of fatigue crack growth based on experimental results of austenitic stainless steel 304L was presented using AFGROW code when NASGRO mode laws adopted. Double through crack at hole specimen is use...
متن کاملEffect of Compressive Residual Stress on the Corner Crack Growth
In the present study, plasticity induced crack closure (PICC) concept and three dimensional (3D) finite element methods (FEM) are used to study the effect of compressive residual stress field on the fatigue crack growth from a hole. To investigate the effect of compressive residual stress on crack opening levels and crack shape evolution, Carlson’s experiments were simulated. Crack shape evolut...
متن کاملAnalyses of Fatigue Crack Growth and Closure Near Threshold Conditions for Large-Crack Behavior
A plasticity-induced crack-closure model was used to study fatigue crack growth and closure in thin 2024-T3 aluminum alloy under constant-R and constant-Kmax threshold testing procedures. Two methods of calculating crack-opening stresses were compared. One method was based on contact-K analyses and the other on contact crack-openingdisplacement (COD) analyses. These methods gave nearly identica...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: JSME international journal. Ser. 1, Solid mechanics, strength of materials
سال: 1988
ISSN: 0914-8809
DOI: 10.1299/jsmea1988.31.2_280